Announcement

**Zwisch** · 23 October 1999, 14:58

Hi,

Be sure that the pin is now stable and that the heathsynk will not fall again... if you have any problem, I recommend that you contact the Online Store ASAP and tell them about this. They might simply ship you anotehr card and ask that you return this one.... that is IF anything else is wrong... why go through all this problem if it was simply loose

As for the registration, it is not very important.. matrox will still grant the full 3 year warranty on the card as long as you have your model and serial number.

Z

**Haig** · 23 October 1999, 20:46

Hi Steve,

You can send an email to webmaster@matrox.com and register it there if you like. Send in your name, address, model #, serial #, and date of purchase. Even if you don't do this, the manufacturer warranty of 3 years will apply. This warranty is only for free repairs. Tech Supp is free no matter how long you have your card.

Haig

**stevenscott** · 23 October 1999, 22:32

Thanx Haig. I sent them an E-mail to make sure it is registered. One question. When I used to work as an engineering techinican and engineer in electronics, most companies I worked for we did 'shake and bake' tests to make sure that products could handle the stress of environmnet, heat, cold, shaking. I mean the extremes too, even if the product was not sold to the government and/or military there were specs. ie., 300 degrees F/50 degrees below/ shaking and frequenices/vibration/10-20KHZ. All kinds of tests to make sure that the heat/cold/shaking/vibration did not kill the product. This did not include a burn in rack which is done for many products. if this testing were done during testing. Or, at least done during the design and proofing process then parts like the heatsink pins coming loose during shipping would probably not happen. Just my many years of experience talking here after recieving a board that this happened to. But, the board seems to be working ok. The problem is that the parts the heatsink were floating over with only one pin secures was that those parts are surface mount and you need a microscope to see any damage, unless it damaged something that shows up when in operation. Just a heads up to make sure your manufacturing and shipping processes (quality control) does a good job. My card does seem to be working ok, but, you really should put something for protection on the board before it ships. Thanx for your quick response on my original note to this forum.
stevenscott in San Diego.
(Please send some weather here, it is always hot and/or warm and sunny. need some rain).

------------------
Home:
Server:
I run a Matrox Marvel G400 AGP with an:
Abit BE6 MotherBoard
Win98
Adaptec CD Creator 4
Pentium III 450
128 MB Ram
SB Live
Maxtor 13 GIG HD
2 3com Nic cards
Wingate 3.05
1 Symbios SCSI for my HP Photo Scanner
Boca 56K Int. Modem
Mitsumi 4801-TE CD-R
MS Precision Pro Joystick
Surfboard SB1200 cable modem
Shamrock 17" Monitor
HP OfficeJet Pro 1175Cse 4/1 printer/Scanner/Fax/copier
Note: I have the Matrox Mystique G200 16MB AGP Video Card, stashed away,
That I took out and replaced with the Marvel G400 on 10/13/99.
-------------------
Client1:
AbitBX6 MB
Win98
Celeron 300a
Maxtor 6.4 GIG HD
128 MB Ram
Netsurf NIC
SB Live sound card
Teac CDRom
Hercules Thriller AGP Video Card
Boca 56K Int. Modem
MS Precision Pro Joystick
Shamrock 15" monitor
----------------

[This message has been edited by stevenscott (edited 24 October 1999).]

[This message has been edited by stevenscott (edited 24 October 1999).]

[This message has been edited by stevenscott (edited 24 October 1999).]

[This message has been edited by stevenscott (edited 24 October 1999).]

Announcement

A note for Haig, Matrox, and those ordering a card online

A note for Haig, Matrox, and those ordering a card online

Comment

Comment

Comment