Announcement

Collapse
No announcement yet.

DuRaNgO!

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    DuRaNgO!

    DuRaNgO!

    Hate to bother all other ppl with this...but but.. =))

    Almost got the same computer as u do except the hdd...so now I wanna now what settings you got to get you cpu up to 620 stable?

    Thanx very much =)

    /excon



    ------------------
    ------------------

    PIII-500MHz @ 574MHz with an Abit BE6 momma
    128mb pc-100
    Mill G400 MAX 32mb
    Seagate 13.3 gb Uata66 hdd
    Seagate 17.2 gb Uata66 hdd
    Adaptec 1542 SCSI card
    Plexwriter 4/2/20 CD Writer
    SB Live!
    Winblows 98 SE & DX7
    3DMark Result 5623,51 3DMarks
    Synthetic CPU 3D Speed 8821,87 CPU 3DMarks
    Rasterizer Score 2600,02 3DRasterMarks
    Game 1 - Race 60,88 FPS
    Game 2 - First Person 51,13 FPS
    Fill Rate 248,78 MTexels/s
    ------------------

    PIII-500MHz @ 574MHz with an Abit BE6 momma
    128mb pc-100
    Mill G400 MAX 32mb
    Seagate 13.3 gb Uata66 hdd
    Seagate 17.2 gb Uata66 hdd
    Adaptec 1542 SCSI card
    Plexwriter 4/2/20 CD Writer
    SB Live!
    Winblows 98 SE & DX7
    3DMark Result 5623,51 3DMarks
    Synthetic CPU 3D Speed 8821,87 CPU 3DMarks
    Rasterizer Score 2600,02 3DRasterMarks
    Game 1 - Race 60,88 FPS
    Game 2 - First Person 51,13 FPS
    Fill Rate 248,78 MTexels/s
    Tags: None
  • #2
    check this page:
    http://forums.murc.ws/ubb/Forum5/HTML/004772.html

    it'll get ya goin'!
    can't wait to get a digital camara

    what "s-code" is your cpu?
    jim



    ------------------
    PIII-500mhz @ 620 ! with an Abit BE6 mobo
    128mb pc-100
    Mill G400 (YAHOO!!!) 32mb @ 165/205 with MGATweak-410mhz, 2.5, 2), PD 5.30 & bios 1.5-22
    Maxtor 14.3 gb Uata66 hdd
    SB Live!
    Winblows 98se & DX7
    32 lbs. of fans, heatsinks and aluminum ductwork
    3DMark Result 5954.69 3DMarks
    Synthetic CPU 3D Speed 9325.69 CPU 3DMarks
    Rasterizer Score 2791.72 3DRasterMarks
    Game 1 - Race 65.07 FPS
    Game 2 - First Person 54.89 FPS
    Fill Rate 268.79 MTexels/s


    System 1:
    AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
    Epox 8K7A
    2x256mb Micron pc-2100 DDR
    an AGP port all warmed up and ready to be stuffed full of Parhelia II+
    SBLIVE 5.1
    Maxtor 40g 7,200 @ ATA-100
    IBM 40GB 7,200 @ ATA-100
    Pinnacle DV Plus firewire
    3Com Hardware Modem
    Teac 20/10/40 burner
    Antec 350w power supply in a Colorcase 303usb Stainless

    New system: Under development

    Comment

    • #3
      aha!

      great one...getting many more fans right now =))

      hmm, the s-code...doesn't relly follow ya there but here u got all that is on my cpu:
      19370678-0238 philliphines (yes I know it's misspelled =))

      there also says on a white label: SMG 991027



      ------------------
      ------------------

      PIII-500MHz @ 574MHz with an Abit BE6 momma
      128mb pc-100
      Mill G400 MAX 32mb
      Seagate 13.3 gb Uata66 hdd
      Seagate 17.2 gb Uata66 hdd
      Adaptec 1542 SCSI card
      Plexwriter 4/2/20 CD Writer
      SB Live!
      Winblows 98 SE & DX7
      3DMark Result 5623,51 3DMarks
      Synthetic CPU 3D Speed 8821,87 CPU 3DMarks
      Rasterizer Score 2600,02 3DRasterMarks
      Game 1 - Race 60,88 FPS
      Game 2 - First Person 51,13 FPS
      Fill Rate 248,78 MTexels/s
      ------------------

      PIII-500MHz @ 574MHz with an Abit BE6 momma
      128mb pc-100
      Mill G400 MAX 32mb
      Seagate 13.3 gb Uata66 hdd
      Seagate 17.2 gb Uata66 hdd
      Adaptec 1542 SCSI card
      Plexwriter 4/2/20 CD Writer
      SB Live!
      Winblows 98 SE & DX7
      3DMark Result 5623,51 3DMarks
      Synthetic CPU 3D Speed 8821,87 CPU 3DMarks
      Rasterizer Score 2600,02 3DRasterMarks
      Game 1 - Race 60,88 FPS
      Game 2 - First Person 51,13 FPS
      Fill Rate 248,78 MTexels/s

      Comment

      • #4
        The S code is printed on top of the cartridge. It's a code like SL3CD or SL37D.
        P3@600 | Abit BH6 V1.01 NV | 256MB PC133 | G400MAX (EU,AGP2X) | Quantum Atlas 10K | Hitachi CDR-8330 | Diamond FirePort 40 | 3c905B-TX | TB Montego A3D(1) | IntelliMouse Explorer | Iiyama VisionMaster Pro 17 | Win2K/NT4

        Comment

        • #5
          okej..

          then the code is SL35E

          what does it mean?



          ------------------
          ------------------

          PIII-500MHz @ 574MHz with an Abit BE6 momma
          128mb pc-100
          Mill G400 MAX 32mb
          Seagate 13.3 gb Uata66 hdd
          Seagate 17.2 gb Uata66 hdd
          Adaptec 1542 SCSI card
          Plexwriter 4/2/20 CD Writer
          SB Live!
          Winblows 98 SE & DX7
          3DMark Result 5623,51 3DMarks
          Synthetic CPU 3D Speed 8821,87 CPU 3DMarks
          Rasterizer Score 2600,02 3DRasterMarks
          Game 1 - Race 60,88 FPS
          Game 2 - First Person 51,13 FPS
          Fill Rate 248,78 MTexels/s
          ------------------

          PIII-500MHz @ 574MHz with an Abit BE6 momma
          128mb pc-100
          Mill G400 MAX 32mb
          Seagate 13.3 gb Uata66 hdd
          Seagate 17.2 gb Uata66 hdd
          Adaptec 1542 SCSI card
          Plexwriter 4/2/20 CD Writer
          SB Live!
          Winblows 98 SE & DX7
          3DMark Result 5623,51 3DMarks
          Synthetic CPU 3D Speed 8821,87 CPU 3DMarks
          Rasterizer Score 2600,02 3DRasterMarks
          Game 1 - Race 60,88 FPS
          Game 2 - First Person 51,13 FPS
          Fill Rate 248,78 MTexels/s

          Comment

          • #6
            it means you have a chip that should make it to 620! be sure you're memory can handle it by disabling your L2 cache in bios then take it to 620, if it runs stable with it disabled, your memory is fine!
            good luck and good "fans"
            jim
            System 1:
            AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
            Epox 8K7A
            2x256mb Micron pc-2100 DDR
            an AGP port all warmed up and ready to be stuffed full of Parhelia II+
            SBLIVE 5.1
            Maxtor 40g 7,200 @ ATA-100
            IBM 40GB 7,200 @ ATA-100
            Pinnacle DV Plus firewire
            3Com Hardware Modem
            Teac 20/10/40 burner
            Antec 350w power supply in a Colorcase 303usb Stainless

            New system: Under development

            Comment

            • #7
              So Jim, what does SL3CC maximum make?? (it's a P3-450)

              Jorden.
              Jordâ„¢

              Comment

              • #8
                let me check, "I'll be back!"
                jim
                System 1:
                AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
                Epox 8K7A
                2x256mb Micron pc-2100 DDR
                an AGP port all warmed up and ready to be stuffed full of Parhelia II+
                SBLIVE 5.1
                Maxtor 40g 7,200 @ ATA-100
                IBM 40GB 7,200 @ ATA-100
                Pinnacle DV Plus firewire
                3Com Hardware Modem
                Teac 20/10/40 burner
                Antec 350w power supply in a Colorcase 303usb Stainless

                New system: Under development

                Comment

                • #9
                  Jorden, 90% of them will do 600! with about 33% doing 621 (4.5x138) nice! the 621 were achived with the alpha heatsink and no cover plate

                  week 14 and later seems the best
                  jim

                  [This message has been edited by DuRaNgO (edited 03 November 1999).]
                  System 1:
                  AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
                  Epox 8K7A
                  2x256mb Micron pc-2100 DDR
                  an AGP port all warmed up and ready to be stuffed full of Parhelia II+
                  SBLIVE 5.1
                  Maxtor 40g 7,200 @ ATA-100
                  IBM 40GB 7,200 @ ATA-100
                  Pinnacle DV Plus firewire
                  3Com Hardware Modem
                  Teac 20/10/40 burner
                  Antec 350w power supply in a Colorcase 303usb Stainless

                  New system: Under development

                  Comment

                  • #10
                    It's a Professional P3-450 as well... not the OEM version... (PLGA) 450/512/100/2.0V S1 ...
                    '98 SL3CC

                    So??
                    Jordâ„¢

                    Comment

                    • #11
                      hey Jorden,
                      can you see the "long" set of numbers on the chip, it should start with 99 or 19?
                      also, what do you have for ram?
                      jim
                      System 1:
                      AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
                      Epox 8K7A
                      2x256mb Micron pc-2100 DDR
                      an AGP port all warmed up and ready to be stuffed full of Parhelia II+
                      SBLIVE 5.1
                      Maxtor 40g 7,200 @ ATA-100
                      IBM 40GB 7,200 @ ATA-100
                      Pinnacle DV Plus firewire
                      3Com Hardware Modem
                      Teac 20/10/40 burner
                      Antec 350w power supply in a Colorcase 303usb Stainless

                      New system: Under development

                      Comment

                      • #12
                        thanx alot for the help durango!

                        Have one new question though

                        When I think I have disabled the l2 cache and put the bus speed at 124 I boot up, when windows is starting I sometimes get registry errors...a lot of em.
                        Is this due to the cooling is not sufficient?



                        ------------------
                        ------------------

                        PIII-500MHz @ 574MHz with an Abit BE6 momma
                        128mb pc-100
                        Mill G400 MAX 32mb
                        Seagate 13.3 gb Uata66 hdd
                        Seagate 17.2 gb Uata66 hdd
                        Adaptec 1542 SCSI card
                        Plexwriter 4/2/20 CD Writer
                        SB Live!
                        Winblows 98 SE & DX7
                        3DMark Result 5623,51 3DMarks
                        Synthetic CPU 3D Speed 8821,87 CPU 3DMarks
                        Rasterizer Score 2600,02 3DRasterMarks
                        Game 1 - Race 60,88 FPS
                        Game 2 - First Person 51,13 FPS
                        Fill Rate 248,78 MTexels/s
                        ------------------

                        PIII-500MHz @ 574MHz with an Abit BE6 momma
                        128mb pc-100
                        Mill G400 MAX 32mb
                        Seagate 13.3 gb Uata66 hdd
                        Seagate 17.2 gb Uata66 hdd
                        Adaptec 1542 SCSI card
                        Plexwriter 4/2/20 CD Writer
                        SB Live!
                        Winblows 98 SE & DX7
                        3DMark Result 5623,51 3DMarks
                        Synthetic CPU 3D Speed 8821,87 CPU 3DMarks
                        Rasterizer Score 2600,02 3DRasterMarks
                        Game 1 - Race 60,88 FPS
                        Game 2 - First Person 51,13 FPS
                        Fill Rate 248,78 MTexels/s

                        Comment

                        • #13
                          Jim: 99130465-0074 Malay (wonder where it's manufactured )

                          I have two 128Mb DIMMs PC-100 RAM.

                          Jorden.
                          Jordâ„¢

                          Comment

                          • #14
                            excon,
                            I believe that you're having ram problems, do you have latency set to 3 for the ram in your bios

                            Jorden,
                            Ahh, 9913, a good week indeed, with a voltage of 2.2, you should definately hit 600, but with the higher volts, comes more heat! a rear fan will probably be needed
                            good luck!
                            jim
                            System 1:
                            AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
                            Epox 8K7A
                            2x256mb Micron pc-2100 DDR
                            an AGP port all warmed up and ready to be stuffed full of Parhelia II+
                            SBLIVE 5.1
                            Maxtor 40g 7,200 @ ATA-100
                            IBM 40GB 7,200 @ ATA-100
                            Pinnacle DV Plus firewire
                            3Com Hardware Modem
                            Teac 20/10/40 burner
                            Antec 350w power supply in a Colorcase 303usb Stainless

                            New system: Under development

                            Comment

                            • #15
                              mmmm, as Jord slips silently into the ranks of the o'c-ers...nice work, DuRaNgO, I'm impressed (for what <u>that's</u> worth )

                              ---------------
                              Holly
                              Holly

                              "All we need is a voluntary, free-spirited, open ended program of procreative racial deconstruction."
                              -Jay Bulworth

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X