Tweet
I would ditch the v2 drivers,and then after removing g400 drivers,reinstall the g400,also make sure there are no ghost devices in device manager(Boot in safe mode and check device manager,to make sure there are no other monitors or video cards listed)
-
-
Hey guys(and gals, if any), thanks a million for your help and patience. It's working OK so far. What was throwing me was the AGP setting I used for the G200-it wanted the 1/1 @100mhz FSB, the G400 uses the 2/3 (thanks Cjolley) AGP divider. I believe I tried it before the bios upgrade and it locked up. Anyway, it's working fine even with V2s still in the machine. Thanks everybody because everybody had great ideas and advice. You just prevented another person from getting a TNT.Comment
-
All's well,That ends well.
Congrats!Comment
Comment