AGP1x = ok AGP2x=bootup hang WHY??????

[space7]

Whisper. PLEAZZZZZZ.Dont ****tup the tread. TANKS.....

[jonng]

Thanks Whisper. Actually I've always had my Clk/AGP set to 2/3 ever since I overclocked my Celeron. Any other ideas on why it won't work?

Hey Space, you talk funny man, haha. I meant that in a cool way.

Where'd you get those card numbers anyways?

[space7]

jonng. It like, I not realy been able to correct my english. two choise. One because english is not my native language. Second it may be that I smock to many G400 . For the credit card numbers please dont stell my money

------------------
My concern is with growth. You must grow to become one, to become whole, to become sane. I am not going to force sanity upon you. Rather, I am going to bring out your insanity. When it is pulled out completely, throw into the wind, sanity will happen to you, you will grow. You will be transformated. That is the meaning of meditation

Osho
--------------
I will try to use a dictionary when I can't
(Corrected by Robert&Collins dictionary)
Credit Card numbers Visa expiration date 2005 N:5125 1548 6548 please dont steel




[This message has been edited by space7 (edited 19 November 1999).]

[James]

Jonng,

Ya, there are a lot of helpful people on this board. I've benefitted from a previous bi-monthly lesson on this topic as well. The search function is handy for finding old pearls of wisdom and for better specifying your question.

space7 makes a good point, even if it's in his own english , there could be differences in performance due to different drivers. Check out mine in my sig above.

Your marks might be a bit low for a test at 800x600. Anyway, you can try the 3DMark database to see if you can tell how systems similar to yours are supposed to do.

Whisper,

Guilty as charged, I'm not as technical as some people, but I just assumed that Jonng already had his AGP divider at 2/3 with a 100 FSB. What's the likelihood of his card running fine with a 100 Mhz AGP bus?

[jonng]

Hey how come PCI List says that my AGP piepline 32 is not working? That only happens when I refresh, but it shows it working initially!

[Kruzin]

Because, when you hit the refresh button, it is not showing you the G400 anymore. Look at the flyout menu at the top. It doesn't say VGA adapter anymore, does it? Switch it back to VGA adapter, and you'll see it's still working...

[Rags]

Hey Whisper,

Maybe you should read some other threads before you come in here shooting your mouth off. Jonng just had a long thread before this one, where we had already instructed him on how to check and change his AGP divider........Some people's children.....

Rags

[jonng]

THANKS TO ALL OF YOU WHO TRIED TO HELP!

Especially Thanks to Kruzin. you were right about the pipeline too!

I've removed my 32m pc66 and have 1 stick of 64m pc100.

Now I get AGP2x without lockups and....

Then I optimized my BIOS to CAS/RAS=2 Precharge control=disabled Precharge=2 Latency=2

Before I tell you my marks, is there anything else that I should change from default to speed my box?

Check these out now:
3dmark = 4248
CPU mark = 5071
Game1 = 41.8
Game2 = 43.2

Shouts out to Kruzin for helping me attain some avg marks that are expected from a G400 MAX.

THANKS. "Another case solved by the murc forums"

[Kruzin]

Yer certainly welcome

Not bad concidering the "total lack of knowledge of the people helping here", eh Whisper?

HAHAHAHAHAHAHA

[Ashley]

A rather trivial footnote to this discussion: the UI anomolies in PCIlist related to the state of queued transactions and selected device were addressed and have hopefully been resolved in the latest 1.32 build...

[Whisper]

Somebody has to keep you kids honest. I will be back from time to time to check up on you, so don't you worry about that.