Announcement

Collapse
No announcement yet.

Win 2000 Pro (RC3 - 2183)

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Win 2000 Pro (RC3 - 2183)

    Hi everybody
    I have a problem with Windows 2000 (as in topic)
    I tried to install driver form my G400 vanilla, but after rebooting I got nothing and when I went to devices manager it showed that the driver failed to start. With previously version of Win 2000 I didn't have that kind of problem. Any ideas or solution.I can stress that my system (win 98se) and the card is working excellently and I have no problems at all.
    Asus p3b-f p3 600E 512mb ram pc100 G400 sh 16mb sb live x-gamer ibm hd 20gb 7200rpm ide 3com 56.6 modem 3com 905b nic asus 50x plextor 4832 cdrw ide viewsonic gt775 hp dj720 hp sj 4100c Win 2000 pro
    Tags: None
  • #2
    Working here.

    What's your config?

    ------------------
    Reach me on MS Messenger as everettes@hotmail.com
    PIII550, Intel SE440BX-2, 3 x 128 Kingston PC100CAS2 ECC, 2940U2W, Seagate Cheetah, Voodoo3 3000, G400-32 SH, Plextor 8\20, Plextor 40Max, Pioneer 303s, SBLive!, MS FFPro, Altec Lansing ACS-48, Sony CDP 520GS

    PIII600EB, CC820, 256Megs, 2940U2W, Seagate Cheetah,G400-32 SH, Plextor 8\20, Plextor 40Max, SBLive!, MS FFPro, Altec Lansing ACS-48, Sony CDP 520GS

    Comment

    • #3
      I installed the just released NT4 drivers and at least got 2D support working. No OpenGL 3D and I'm not sure about DX 3D.
      Asus P2B-DS, 2 x Pentium III 450 @ 504, 128MB CAS 2 SDRAM, Matrox G400
      MAX, Sony CPD-G500, Sony GDM-17SE2T, Sound Blaster Live MP3+, NetGear
      FA310TX 10/100 NIC, IBM 9ZLX 9GB 10,000 RPM LVD Drive, BusLogic 958
      Ultra Fast/Wide SCSI Controller, Pioneer DVD-303s 6X DVD-ROM, Toshiba
      6102B 32x CDROM, Yamaha 4260t CD Writer,
      Linux (Primary OS), Win98, and Win2K

      Comment

      • #4
        Nobody has anything other than 2D and some really lousy D3D running under Win2k, outside of beta testing. Be patient. You're using an OS not scheduled for release until next February.

        - Ash

        ------------------
        Listen up, you primitive screwheads! See this? This is my BOOMSTICK! Etc. etc.

        This signature is not Copyright by anyone. Especially not some guy named Steve. Yeah. That's it. Please don't kill me, Holly.
        The Internet - where men are men, women are men, and teenage girls are FBI agents!

        I'm the least you could do
        If only life were as easy as you
        I'm the least you could do, oh yeah
        If only life were as easy as you
        I would still get screwed

        Comment

        • #5
          He is also using a release that is offered by Dell as an O/S option on their retail systems.

          Oh yea they support it too....

          "When a ship misses its port it is never the Harbor's fault"

          [This message has been edited by LAMFDTK (edited 22 November 1999).]

          Comment

          • #6
            Which driver are you trying to use? It HAS to be a DirectX 7 compatible driver - MS changed the code in RC3 to require it.

            - Ash

            ------------------
            Listen up, you primitive screwheads! See this? This is my BOOMSTICK! Etc. etc.

            This signature is not Copyright by anyone. Especially not some guy named Steve. Yeah. That's it. Please don't kill me, Holly.
            The Internet - where men are men, women are men, and teenage girls are FBI agents!

            I'm the least you could do
            If only life were as easy as you
            I'm the least you could do, oh yeah
            If only life were as easy as you
            I would still get screwed

            Comment

            • #7
              Actually most OEMS hope to have it in December so there will will hopefully be some kind of driver before then ;p Feb 17 is RETAIL release OEMS get it long before then guys.

              Comment

              • #8
                Thanx for some info. I know that I wasn't very clear, but I was trying to install Matrox G400 beta win 2000 driver.

                Here is my spec:
                P3_450 oc 600 (2.0v) Vantec cooler, Asus p3b-f (6PCI) g400 16mb_sh SB Live Value IBM drives 10 (7200) 15 (5400) Asus 40x Panasonic CD-R 4x/8x IDE 2x128 Pc100 (CAS222 by SPD) 33.6 USRob, cable modem, 3com 905b, and some external stuff
                Asus p3b-f p3 600E 512mb ram pc100 G400 sh 16mb sb live x-gamer ibm hd 20gb 7200rpm ide 3com 56.6 modem 3com 905b nic asus 50x plextor 4832 cdrw ide viewsonic gt775 hp dj720 hp sj 4100c Win 2000 pro

                Comment

                Previous template Next
                Working...
                X