motherboard or G400?

[Jorden]

Alan2,

could you try something for me? If you have a G400 Dual Head, attach the monitor to the second head. (if only you could somehow make sure you have DH enabled...)

Jorden.

[Maggi]

Hi Allan,

- pop in your TNT
- look into your Mobo's bios
- set VGA boot sequence to AGP/PCI
- set Graphics Aperture Size to 256MB (even if you have less installed)
- boot into save mode (hold down F8 while booting)
- delete all gfx-card entries from your hardware manager
- shutdown
- change to G400
- boot and on request point to location where PD5.41 is extracted to

...

I hope this fixes your probs.


------------------
Cheers,
Maggi
________________________

Working Rig:
Asus P2B-DS @ 103MHz FSB
Double Pentium III-450 @ 464 MHz
4 x 128MB CAS2 SDRAM
Matrox Millennium G400 32MB DualHead
Eye-Q 777 (22" with 127kHz) on primary VGA
Nokia 445Xi (21") on secondary VGA


Home Rig:
Asus P2B-S Bios 1010 @ 100MHz FSB
Celeron 333A @ 500MHz
2 x 128MB CAS2 SDRAM
Matrox Millennium G400 32MB DualHead @ 150/200MHz
CTX VL710T (17")
and a brand new Pioneer 303S SCSI-DVD

[Maggi]

hehehe ... forget that step about popping in your TNT since your G400 seems to be working in DOS mode now ...

Also you could try to force AGP1x via the Reg-patches available form MURC.