MATROXG200 problem with ATHLON500/ASUS K7M PL HELP

[shampath1]

hai to all

i have MATROX MARVEL G200 with CELERON 333/ASUS P2B MB wothout any rpoblem
but when i tried to USE it with ATHLON 500 MHZ/ ASUS K7M...it doen not even boot properly
even after setting the DRIVER & boot AGPoption in bios
can anyone help me to RUN matrox marvel G200-tv with ATHLON 500MHZ/ASUS K7M

thanks

shampath

[Mike H]

Most likely your problem is from your ram or your powersupply.

------------------
Mike H.

AMD Athlon 500 @ 750 (214*3.5) Asus K7M Rev. 1.04 Bios 12-9-99 128 Meg Corsair PC133 Matrox G-400 Dualhead 32MB 5.41 Drivers SB Live! Full Retail Western Digital Caviar ATA66 AC313000RTL

I can change the multiplier and voltage on your Athlon Processor!
mikehdft@msn.com

[Greebe]

Shampath1, Would you post up your IRQ's?
I doubt that your problem is arisng from the powersupply or ram.

------------------
Designer of the first commercial Athlon mod. Currently marketing the "Eclipse" through AZZO Computers.
Anyone up for an Eclipse'd Athlon 850? Email me (epc@netdirect.net) for more information

2836 mips, 1.107 gflops @ 850 mHz 1:3 latency
CPUmark99 72.3
FPU Wi

nmark 4630

3Dmark 99 Max (8x6 16, 16, triple) PD5.41
7885
15181

[Zwisch]

Hi,
Did you install the AGp miniport patch and the BusMastering patch?