Tweet
Asus+K7+G400M conflict !
I have a serius problem with my newly
(soon f--king trasched)
G400 Max, ASUS K7M, Atholn 700mhz system.
The system is equiped with 256 mb of PC100 RAM, floppy and HD.
(I do have other components but this fault
happens as soon I mount the G400
(the first thing I do)).
I've have W95B, installed USB, VIA IDE drivers, VIA APM fix, AGP drivers
supplied on the asus cd
(can't find any newer),
latest drivers for G400, lastest official bios km1007 for the mb, 100 mhz FSB. Can't find any agp divider function/setting (automatic on K7???)
Graphic Aperture Size: tested 32 to 512 mb
(removed card in "my computer panel",
changed setting, rebooted etc
same result all the time)
The problem is that the card have three memory conflicts with
"PCI standard PCI-to-PCI".
Some times when I boot up the
screen turns black, i reboot 1 to 3 times again and the systems pops up correct.
When started the card seems to working (haven't "sysmarked it") when playing
unreal, driver etc etc etc..
When I trie to install a intel pro 10/100+ ethernet card the screens goes black instead
for winlogon. Safe mode reboot works but
if I remove card, reboot, install card,
reboot, the result is the same. If I remove
intel card the system is "ok"
(but not really).
The intel and g400 have been working (but still in conflict) in an erlier installation
on the same computer. I do have formated the
"new" hd and so on etc.
ANY suggestion is wanted !
Have tried safe mode, fast mode settings in
bios without any diffrent result. I do think
the problem with the G400 card is related to
the "PCI..." falut, but how to fix that ??
PCI list indicates AGP1, bus mastering.
Forcing AGP2 with regkeys doesn't work.
Heelp wanted !!!!
Yours
------------------
K7'an rockar fett i förorten, ...inte !
(soon f--king trasched)
G400 Max, ASUS K7M, Atholn 700mhz system.
The system is equiped with 256 mb of PC100 RAM, floppy and HD.
(I do have other components but this fault
happens as soon I mount the G400
(the first thing I do)).
I've have W95B, installed USB, VIA IDE drivers, VIA APM fix, AGP drivers
supplied on the asus cd
(can't find any newer),
latest drivers for G400, lastest official bios km1007 for the mb, 100 mhz FSB. Can't find any agp divider function/setting (automatic on K7???)
Graphic Aperture Size: tested 32 to 512 mb
(removed card in "my computer panel",
changed setting, rebooted etc
same result all the time)
The problem is that the card have three memory conflicts with
"PCI standard PCI-to-PCI".
Some times when I boot up the
screen turns black, i reboot 1 to 3 times again and the systems pops up correct.
When started the card seems to working (haven't "sysmarked it") when playing
unreal, driver etc etc etc..
When I trie to install a intel pro 10/100+ ethernet card the screens goes black instead
for winlogon. Safe mode reboot works but
if I remove card, reboot, install card,
reboot, the result is the same. If I remove
intel card the system is "ok"
(but not really).
The intel and g400 have been working (but still in conflict) in an erlier installation
on the same computer. I do have formated the
"new" hd and so on etc.
ANY suggestion is wanted !
Have tried safe mode, fast mode settings in
bios without any diffrent result. I do think
the problem with the G400 card is related to
the "PCI..." falut, but how to fix that ??
PCI list indicates AGP1, bus mastering.
Forcing AGP2 with regkeys doesn't work.
Heelp wanted !!!!
Yours
------------------
K7'an rockar fett i förorten, ...inte !
Email me (epc@netdirect.net) for more information 
Comment