Announcement

Collapse
No announcement yet.

Is 5.41 slow? Or am inhaling noxious gas?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Yes, welcome back, Ami.

    These forums have been lessened by your absence. Please stick around

    ------------------
    Kind Regards,

    KvH


    Comment


    • #17
      Not according to someone in the Power Desk forum... eesh

      Okay, at least someone else is getting the same results as I am, i'm not doing anything wrong.

      The P3B-F's were pretty plentiful around here a few months ago, I didn't notice any shortage... I got the all-PCI version Verynice.


      and err, not to be inflammatory. But I don't know if I'd avoid a motherboard because of 3 missing FPS...

      ------------------
      Ami Y. Koriuchi - foxyviolet@hotmail.com
      Asus P2B 1010 - P3-500 - And a G400Max now.
      256MB 6NS 70 GB of 10k RPM SCSI UW

      You're a ... 'guest' ... of the Master Control Program.



      [This message has been edited by PurpleHaze (edited 29 December 1999).]
      Ami Y. Koriuchi - MY EMAIL IS DEAD

      SYSTEM1
      Asus K7V266 - Athlon XP 1800+ - GeForce 4 TI 4600 128MB -
      1024 MB PC2100 DDR -
      200 GB UDMA100 7200 RPM - 60GB LVD 160 10K RPM

      SYSTEM2
      Asus A7V133 - Athlon 1.4 - G400Max
      768MB PC133 - 75 GB of 10k RPM SCSI UW

      HI SOMETiMES I GO AWAY FOR LONG TIME AND COME BACK YEARS LATER HI!

      Comment


      • #18
        Wow...I just hopped over to the PD forum to peek at that other thread of yours (naughty, naugty, cross-posting like that ).

        Don't worry about that twit, Ami. He's got no clue, and no place to bitch, with the way he's been complaining around here. I put in my 2 cent's worth in that thread while I was there (hey, I don't moderate that forum, so a little torching seemed in order)
        Core2 Duo E7500 2.93, Asus P5Q Pro Turbo, 4gig 1066 DDR2, 1gig Asus ENGTS250, SB X-Fi Gamer ,WD Caviar Black 1tb, Plextor PX-880SA, Dual Samsung 2494s

        Comment


        • #19
          I just built a system for a friend using a P3B-F. Wasn't all PCI but nice MB all the same. Had the 1004 BIOS out of the box.

          Introduced him to that jumperless O/C and now I gotta put an extra fan in for da heat that comes with it.

          MSI K7D Master L, Water Cooled, All SCSI
          Modded XP2000's @ 1800 (12.5 x 144 FSB)
          512MB regular Crucial PC2100
          Matrox P
          X15 36-LP Cheetahs In RAID 0
          LianLiPC70

          Comment


          • #20
            Thanks, Kruizin, I'll have to check out what you said. :P I actually meant to post here since the PD forum barely gets any bites, but I didn't realize i was there till after the post.

            Yeah, I haven't updated my bios on the P3B-F yet but doesn't seem I've had to. May take a look tonight. Felt good getting rid of ALL isa devices though. I'm overclocked to a whopping 515mhz, (From 500), Scomp, can't seem to get the thing to boot any higher than that.


            Now I just really gotta update my signature. :P

            [This message has been edited by PurpleHaze (edited 30 December 1999).]
            Ami Y. Koriuchi - MY EMAIL IS DEAD

            SYSTEM1
            Asus K7V266 - Athlon XP 1800+ - GeForce 4 TI 4600 128MB -
            1024 MB PC2100 DDR -
            200 GB UDMA100 7200 RPM - 60GB LVD 160 10K RPM

            SYSTEM2
            Asus A7V133 - Athlon 1.4 - G400Max
            768MB PC133 - 75 GB of 10k RPM SCSI UW

            HI SOMETiMES I GO AWAY FOR LONG TIME AND COME BACK YEARS LATER HI!

            Comment


            • #21
              mmmmmm, beer cooled processor.

              Comment

              Working...
              X