Tweet
3DMark 2000
This post is kinda the same as Kristian's
at Rage Underground....he said goodbye to the
Fury as did I...anyways it was all about
3DMark 2000 scores and what worked and didnt
work....now considering the fillrate of this
card compared to the Rage Fury I think we
should have a resolution of 1024x768 16bit
(instead of 800x600 for the ATI post)...one
thing I did notice is that the Fury would drop almost 600 marks going from 8x6 to 1x7.
The G400 only dropped just over 200!...quite
impressive!...well here's my marks for 1024x768 16bit....
Your setup
CPU
Intel Pentium III 560 Mhz
3D Accelerator
Matrox Millennium G400 - English
Chipset
Unknown
Resolution
1024*768
Z-Buffer Depth
16-bit
Frame Buffer
Triple
Refresh Rate
V Sync.Off
CPU Optimization
Intel(R) Pentium(R) III
Your test results
Your 3DMark2000 Score was 2644 3D Marks.
From the table below you can see detailed results of all tests.
Test
Results
3DMark Result
2644 3D marks
CPU Speed
155 CPU 3D marks
Game 1 - Helicopter - Low Detail
52.8 FPS
Game 1 - Helicopter - Medium Detail
32.5 FPS
Game 1 - Helicopter - High Detail
10.6 FPS
Game 2 - Adventure - Low Detail
61.3 FPS
Game 2 - Adventure - Medium Detail
39.4 FPS
Game 2 - Adventure - High Detail
23.7 FPS
Fill Rate (Single-Texturing)
271.1 MTexels/s
Fill Rate (Multi-Texturing)
269.1 MTexels/s
High Polygon Count (1 Light)
2109 KTriangles/s
High Polygon Count (4 Lights)
1914 KTriangles/s
High Polygon Count (8 Lights)
1708 KTriangles/s
8MB Texture Rendering Speed
232.8 FPS
16MB Texture Rendering Speed
226.1 FPS
32MB Texture Rendering Speed
158.1 FPS
64MB Texture Rendering Speed
55.1 FPS
Bump Mapping (Emboss, 3-pass)
108.7 FPS
Bump Mapping (Emboss, 2-pass)
137.8 FPS
Bump Mapping (Emboss, 1-pass)
240.1 FPS
Bump Mapping (Environment)
97.0 FPS
note:remember to run all tests to make this
fair!....to run the 64MB texture mark go to
bios and change aperture size to 128Mb instead of 64....Catch y'all later!
at Rage Underground....he said goodbye to the
Fury as did I...anyways it was all about
3DMark 2000 scores and what worked and didnt
work....now considering the fillrate of this
card compared to the Rage Fury I think we
should have a resolution of 1024x768 16bit
(instead of 800x600 for the ATI post)...one
thing I did notice is that the Fury would drop almost 600 marks going from 8x6 to 1x7.
The G400 only dropped just over 200!...quite
impressive!...well here's my marks for 1024x768 16bit....
Your setup
CPU
Intel Pentium III 560 Mhz
3D Accelerator
Matrox Millennium G400 - English
Chipset
Unknown
Resolution
1024*768
Z-Buffer Depth
16-bit
Frame Buffer
Triple
Refresh Rate
V Sync.Off
CPU Optimization
Intel(R) Pentium(R) III
Your test results
Your 3DMark2000 Score was 2644 3D Marks.
From the table below you can see detailed results of all tests.
Test
Results
3DMark Result
2644 3D marks
CPU Speed
155 CPU 3D marks
Game 1 - Helicopter - Low Detail
52.8 FPS
Game 1 - Helicopter - Medium Detail
32.5 FPS
Game 1 - Helicopter - High Detail
10.6 FPS
Game 2 - Adventure - Low Detail
61.3 FPS
Game 2 - Adventure - Medium Detail
39.4 FPS
Game 2 - Adventure - High Detail
23.7 FPS
Fill Rate (Single-Texturing)
271.1 MTexels/s
Fill Rate (Multi-Texturing)
269.1 MTexels/s
High Polygon Count (1 Light)
2109 KTriangles/s
High Polygon Count (4 Lights)
1914 KTriangles/s
High Polygon Count (8 Lights)
1708 KTriangles/s
8MB Texture Rendering Speed
232.8 FPS
16MB Texture Rendering Speed
226.1 FPS
32MB Texture Rendering Speed
158.1 FPS
64MB Texture Rendering Speed
55.1 FPS
Bump Mapping (Emboss, 3-pass)
108.7 FPS
Bump Mapping (Emboss, 2-pass)
137.8 FPS
Bump Mapping (Emboss, 1-pass)
240.1 FPS
Bump Mapping (Environment)
97.0 FPS
note:remember to run all tests to make this
fair!....to run the 64MB texture mark go to
bios and change aperture size to 128Mb instead of 64....Catch y'all later!
Comment