dual video card problem/issue

[wildman]

This may be more of a general hardware issue but I am running a g400 DH AGP and a G200 PCI on a win2k system(p2 266 256Mb gigabyte mb) for the proper dual desktop system. I want to know if it is possible to force the system (bios?) to recognise the AGP card before the PCI card as the PCI runs a 20" sony fixed frequency monitor and I cannot see any boot or error information which is a pain as my win2k system has just started crashing with a lovely blue screen (when I shut down a mail client that has been open for more than 10 minutes, suggestions on this are also welcome, more stable? yeah right)that I cannot read unless I change monitor plugs. I need the G400 to run on the multi sync monitor to play quake 3.
Any suggestions?
Thanks
Ben

[Maggi]

I don't know your BIOS, but my ASUS offer a switch for the 'VGA Boot Sequence' which was defaulted to PCI/AGP.

I had to set it to AGP/PCI to determine the AGP card as primary display adapter and I guess your BIOS should offer that option too.

Cheers,
Maggi