I did some extensive research over the weekend. What drawn me to the conclusion that it's matrox drivers or video card that is the problem is when I took out the video card and used the onboard video instead and presto I am rock solid stable again. The errors I got were these:
=======================
PAGE_FAULT_IN_NONPAGED_AREA
0x00000050 (0xBC3C63D7, 0x00000000, 0xBC3C63D7, 0x00000003)
---------------------------
UNEXPECTED_KERNEL_MODE_TRAP
0x0000007F (0x0000000d, 0x00000000, 0x00000000, 0x00000000)
---------------------------
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0X000000D1 (0x010CEC83, 0X00000012, 0X00000000, 0xBFE42F13)
---------------------------
KMODE_EXCEPTION_NOT_HANDLED
0x0000001E (0xC0000005, 0x8049EFA8, 0x00000001, 0x0000D500)
---------------------------
I need to know what the 4 parameters in each error mean.
Basically I need to know from this info if it's hardware related or just
bios
related. the 815E chipset is new and could be the problem.
OS: windows 2000 professional
Hardware used:
P3 FC-PGA 733 cpu
256 megs of muschkin HSDRAM unbuffered non ecc
AGP: matrox G400 DH (uninstalled using onboard 815 graphics cotroller
instead)
slot1: empty
slot2: SBlive (original)
slot3: empty
slot4: 3Com etherlink
slot5: Adaptec 2940U2W scsi
I tested the memory with a memory tester downloaded from
mushkin's website, no errors found in the memory.
I also called mushkin to ask if they had any issues with this ram
running on CUSL2 they said no, so one would think if this ram
ran fine on a BX board and goes to shit on a CUSL2 board then
it's not the ram and muskin would get calls up the ass over it
All the same software and hardware worked 95% stable on
my BX board. I am trying to find out the cause of all my problems
before I go returning stuff.
So now I am not getting BSOD errors I need to find out if A) do I need to return the card or B) is it a driver issue ?
=======================
PAGE_FAULT_IN_NONPAGED_AREA
0x00000050 (0xBC3C63D7, 0x00000000, 0xBC3C63D7, 0x00000003)
---------------------------
UNEXPECTED_KERNEL_MODE_TRAP
0x0000007F (0x0000000d, 0x00000000, 0x00000000, 0x00000000)
---------------------------
DRIVER_IRQL_NOT_LESS_OR_EQUAL
0X000000D1 (0x010CEC83, 0X00000012, 0X00000000, 0xBFE42F13)
---------------------------
KMODE_EXCEPTION_NOT_HANDLED
0x0000001E (0xC0000005, 0x8049EFA8, 0x00000001, 0x0000D500)
---------------------------
I need to know what the 4 parameters in each error mean.
Basically I need to know from this info if it's hardware related or just
bios
related. the 815E chipset is new and could be the problem.
OS: windows 2000 professional
Hardware used:
P3 FC-PGA 733 cpu
256 megs of muschkin HSDRAM unbuffered non ecc
AGP: matrox G400 DH (uninstalled using onboard 815 graphics cotroller
instead)
slot1: empty
slot2: SBlive (original)
slot3: empty
slot4: 3Com etherlink
slot5: Adaptec 2940U2W scsi
I tested the memory with a memory tester downloaded from
mushkin's website, no errors found in the memory.
I also called mushkin to ask if they had any issues with this ram
running on CUSL2 they said no, so one would think if this ram
ran fine on a BX board and goes to shit on a CUSL2 board then
it's not the ram and muskin would get calls up the ass over it
All the same software and hardware worked 95% stable on
my BX board. I am trying to find out the cause of all my problems
before I go returning stuff.
So now I am not getting BSOD errors I need to find out if A) do I need to return the card or B) is it a driver issue ?
Comment