Tweet
G400 2nd head....
Is there something different in the second vga out of the card? If I connect my HW+ in this one it doesn't detect any signal, why?
Spazm
Spazm
-
P3-667@810 retail, Asus CUSL2-C, 2*128 mb PC-133(generic), G400DH 16mb, SBLive value, HollyWood+, 1*Realtek 8029(AS) and 1*Realtek 8039C, Quantum 30g, Pioneer DVD-115f -
This is because the HW+ is meant to work with your Primary Display, I would be the 2nd head doesn't support "overlay"...
Your best bet is to use the primary display or use the G400's decoding abilities...
then again I could be completely wrong...
Craig
------------------
P3-700e cB0 @980Mhz - Watercooled, DangerDen waterblock, Enhiem 1046 pump, 8x6x2 HeaterCore Radiator - Asus P2b Rev. 1.10 /w MSI slocket - 128Mb PC100 - G400 DH 32b SGR - IBM 20Gb 75GXP HDD - InWin A5001.3 Taulatin @1600 - Watercooled, DangerDen waterblock, Enhiem 1046 pump, 8x6x2 HeaterCore Radiator - Asus TUSL2C - 256 MB Corsair PC150 - G400 DH 32b SGR - IBM 20Gb 75GXP HDD - InWin A500 -
I know that it was ment to be used with the first head but the cable and low pass of the HW+ lower my image quality so much that I can't even read the text under my desktop icons.
Seem's that I'll have to stick with the TV output...
SpazmP3-667@810 retail, Asus CUSL2-C, 2*128 mb PC-133(generic), G400DH 16mb, SBLive value, HollyWood+, 1*Realtek 8029(AS) and 1*Realtek 8039C, Quantum 30g, Pioneer DVD-115fComment
-
There is one trick to avoid this problem...
Must_use_passthrough
But I never try it...
------------------
PIII-550E@733/1.65v, P3B-F, G400DH/32MB@140/186P4-2.8C, IC7-G, G550Comment
-
Thanks for the info, i'll check how to make it work now.
SpazmP3-667@810 retail, Asus CUSL2-C, 2*128 mb PC-133(generic), G400DH 16mb, SBLive value, HollyWood+, 1*Realtek 8029(AS) and 1*Realtek 8039C, Quantum 30g, Pioneer DVD-115fComment
Comment