Which bios

[Topha]

guess its a stupid questiono, but when i install the new bios, it gives me three options, which one should i choose?

[Liquid Snake]

I assume you're using the windows flash program? They are the DOS TV Output settings. If you don't even use DOS, just leave it on the default setting (first one). If you need TV output under DOS, consult the readme:

<font face="Verdana, Arial, Helvetica" size="2">
TV output support for DOS
=========================

Some models of Matrox graphics cards support TV output. With TV output
support, you can view or record your computer display with a TV or
video recorder connected to your graphics card.

TV output is supported with Windows 95/98/Me/2000, Windows NT 4.0, and
DOS. By default TV output is disabled. If TV output is disabled, a TV
connected to your computer will display black. For information on how
to enable TV output mode in Windows 95/98/Me/2000 or NT 4.0, see
Matrox online documentation.

To enable TV output for DOS display modes, the BIOS of your Matrox
graphics card needs to be configured.

DOS display modes may be used when:

- your computer is restarted in DOS mode
- DOS programs are run full-screen
- a full-screen DOS prompt is used under Windows
- text is displayed on your computer monitor before Windows starts

Note: For G450-based graphics cards, DOS display modes are not
supported.</font>

[xortam]

DOS display mode is handy if you're remotely booting up your Windows PC while viewing only the TV.