Tweet
if you can find a cheap voodoo3, that's your best solution for that setup (had something similar once-upon a time). Very good 2d (no, not matrox good, but close to the G200) and good 3d
-
no 32bit color
System 1:
AMD 1.4 AYJHA-Y factory unlocked @ 1656 with Thermalright SK6 and 7k Delta fan
Epox 8K7A
2x256mb Micron pc-2100 DDR
an AGP port all warmed up and ready to be stuffed full of Parhelia II+
SBLIVE 5.1
Maxtor 40g 7,200 @ ATA-100
IBM 40GB 7,200 @ ATA-100
Pinnacle DV Plus firewire
3Com Hardware Modem
Teac 20/10/40 burner
Antec 350w power supply in a Colorcase 303usb Stainless
New system: Under development
-
very true (for 3d). but... for an unserious gamer, eeking out the most perf possible on that old system is probably the best way to go rather than for eye-candy. 3dfx did have fantstic looking 16bit color due to their rendering.... but it certainly is NOT 32bit. tough to find, though.Comment
-
I have the same basic system, it's for students to use here in my office. I have a G400DH in it, works great.
Jeff-We stop learning when We die, and some
people just don't know They're dead yet!
Member of the COC!
Minister of Confused Knightly Defence (MCKD)
Food for thought...
- Remember when naps were a bad thing?
- Remember 3 is the magic number....Comment
-
Well, thank u all for posting...
I could get a radeon 32 DDR (a friend of mine gave me for a week) so I will try it.Comment
-
need help
I've installed the card into my sister's comp. Everything seemed to be fine, until i've ran 3DMark ran (showed about 1200 points), q3 ran (~20fps).
In DxDiag the 'agp texturing' button is grey and is disabled. The 4.37v Via driver package and dx80a and ati driver version 4-13-9016-efg are installed.
I would say the tnl part is out of order.
Anybody ever met such problem?Comment
Comment