Overclock Matrox G450 with by means of change of contents PINS 5.1. Help please!!!

[Propretor]

Dear Experts!
Only you know structure PINS 5.1.
I am engaged overclocking Matrox G450PCI.
PINS 5.1 by mine videocard:

;MGA Bios Programming Utility v2.28.000d
;(C) Matrox Graphics Inc. (2001)
;
Fill: 0 127 0xFF
;Matrox G450 PCI
;VGA Enabled - BIOS V2.0

;loc size val desc
0 2 0x412e ; "PIN"
2 1 0x80 ; Struct length
3 1 0xff
4 2 0x0501
6 2 0x470
8 2 0x0006
10 2 0x0331
12 16 'KDV06139'
28 6 '305'
;34 2 0x3EB3 ;
36 1 75 ; Max SClk VCO freq/8
37 1 75 ; Max VClk VCO freq/8
38 1 75 ; Max PClk VCO freq/8
39 1 90 ; Max CRTC1 PClk/4 8bpp
40 1 90 ; Max CRTC1 PClk/4 16bpp
41 1 90 ; Max CRTC1 PClk/4 24bpp
42 1 90 ; Max CRTC1 PClk/4 32bpp
43 1 58 ; Max CRTC2 PClk/4 16bpp
44 1 58 ; Max CRTC2 PClk/4 32bpp
45 1 0xff ; VGA1 PClk
46 1 0xff ; VGA2 PClk
47 1 28 ; Max PClk Plink/4
48 4 0x404a1160
52 4 0x0000ac00
56 1 94 ; VGA SClk/4 - !!!
57 1 94 ; VGA VClk/4 - !!!
58 4 0x0090a409 ; VGA OP3
62 4 0x0c81462b ; VGA MCTLWTST
66 4 0x80000004 ; VGA MEMMISC
70 4 0x01001123 ; VGA MEMRDBK
74 1 94 ; SH SClk/4 - !!!
75 1 94 ; SH VClk/4 - !!!
76 4 0x0090a409 ; SH OP3
80 4 0x0c81462b ; SH MCTLWTST
84 4 0x80000004 ; SH MEMMISC
88 4 0x01001123 ; SH MEMRDBK
92 1 94 ; DH SClk/4 - !!!
93 1 94 ; DH VClk/4 - !!!
94 4 0x0090a409 ; DH OP3
98 4 0x0c81462b ; DH MCTLWTST
102 4 0x80000004 ; DH MEMMISC
106 4 0x01001123 ; DH MEMRDBK
110 4 0xe7fffffe ; Factory Options
114 2 0xffa1 ; MemConfig
116 2 0x5911 ; Display Info
118 1 90 ; Max PClk1/4
119 1 90 ; Max PClk2/4
120 1 0xff ; Reserved
121 1 32 ; Min SClk VCO
122 1 32 ; Min VClk VCO
123 1 32 ; Min PClk VCO
124 1 51 ; Max DH PClk1 32bpp/4
125 1 51 ; Max DH PClk2 32bpp/4
126 1 255 ; Reserved/PARrev
;127 1 0xD6 ; checksum

:filetype CONDOR
:PCBinfo 7003-03
:SubsystemVendorId 0x0d41102b

I have changed SClk with 288MHz on 376MHz.
As a result of frequency: GClk=WClk=150MHz, MClk=188MHz.
Memory frequency with factor 1/2,
and GPU with factor 2/5 from frequency of the system generator.
However PLL can form on the output of frequency and with
other factors: 1/3 2/5 4/9 1/2 2/3 1.
Prompt please where the factors PLL in PINS 5.1 are written down and what
values correspond to all ruler of multipliers from 1/3 up to 1.
Very much to you I shall be grateful.

Roman.

[Propretor]

The sirs, really nobody is competent on the given question?

[PAugustin]

[Goc]

Yep, pretty confusing...

I think he's asking about where he can change multipliers for memory and GPU and what are the numbers that he needs to put in these places...

Guess I didn't make sense either...

[Guru]

Try asking Grzegorz Mazur over at the MatroX files!

[Propretor]

Originally posted by Goc
Yep, pretty confusing...

I think he's asking about where he can change multipliers for memory and GPU and what are the numbers that he needs to put in these places...

Guess I didn't make sense either...

I badly know the English language. But I try to write correctly.
Completely correctly you have understood me.

[Propretor]

Originally posted by Guru
Try asking Grzegorz Mazur over at the MatroX files!

Asked, but he does not respond. Very much asked, but he is silent.

[Propretor]

Really anybody except for Grzegorz Mazur can not to me help?

[Goc]

Don't know if anyone else but Gregorz has the information you need... When Haig was asked about PINS information on Matrox forums, he said he can't give them out because Matrox doesn't want people overclocking their cards using PINS...
Guess the only thing you can do is try experimenting and find out on your own...
Or keep mailing GBM...

[Fat Tone]

...or search these forums because the question has probably been asked before!

T.

[Propretor]

Originally posted by Goc
Don't know if anyone else but Gregorz has the information you need... When Haig was asked about PINS information on Matrox forums, he said he can't give them out because Matrox doesn't want people overclocking their cards using PINS...
Guess the only thing you can do is try experimenting and find out on your own...
Or keep mailing GBM...

Thank for support and approval. I have understood it the confidential information for all.

[Propretor]

Originally posted by Tony Andrews
...or search these forums because the question has probably been asked before!

T.

Is not present. I searched in all forum very in detail and long. But anything about it has not found. I am not strong in English, but it seems all so. If you will have the information on it, please inform.

[Fat Tone]

Sorry Roman, I was going on an old memory. I can't find it either now. Good luck with your search.

Tony.

[Propretor]

Originally posted by Tony Andrews
Sorry Roman, I was going on an old memory. I can't find it either now. Good luck with your search.

Tony.

Thank.

[Guru]

Originally posted by null_pointer_us
You should be able to find the information you want here in the in-depth section:

http://grafi.ii.pw.edu.pl/gbm/matrox/

No he will not! Please read the above posts before posting!