Tweet
G400 MAX fan
I put my old G400 MAX into my server PC (the Millennium I was starting to fail). The fan on it has been making quite a bit of noise. It's probably the noisiest fan in there. Since I don't need to use the 3D capabilities of the card, would it be possible to just remove the fan altogether and not have the G400 overheat?
-
-
No... the card will become much to hot, the Heatskin ist far to small.System:
P III-S 1.4@1.52
512 MB SDR-Ram
Gigabyte-6IEML
Matrox Parhelia
-
Isn't your G400 still in warranty LS?"Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind." -- Dr. Seuss
"Always do good. It will gratify some and astonish the rest." ~Mark TwainComment
-
The warranty is three years, right? I received my G400 at the end of August, 1999. So I guess it just expired
Comment
-
My G400 has run without a heatsink for several months without problems, if you clock back your Max a bit you should be fine without the fan, as long as you don't push it."That's right fool! Now I'm a flying talking donkey!"
P4 2.66, 512 mb PC2700, ATI Radeon 9000, Seagate Barracude IV 80 gb, Acer Al 732 17" TFTComment
-
Just superglue a fan to it.
Cost < $5
Time < 5 min.
chuck
PS an old 486 fan works great.Chuck
秋音的爸爸
Comment
-
i have the same problem (very noisy fan on G400Max).
Where can I get a new fan (wich is better than the original)?
What are specs of the original fan? rpm, size, powermy system:
AMD XP 2000+
Abit KTA7 (VIA 4.49)
512MB SDRAM133
Matrox Millennium G400 MAX (5.91, AGP 2x)
Windows XP ProfComment
-
"Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind." -- Dr. Seuss
"Always do good. It will gratify some and astonish the rest." ~Mark TwainComment
Comment