Question about G400

[Str@ight]

Is the Matrox G400 able to run the following Monitor(GDM-1960) ?

Resolution: 1280x1024
Video Bandwidth: 100 MHz
Pixel Clock: 119.843 MHz

Horizontal

Horiz Freq: 70.7 kHz
Active Video: 10.68 ns
Back Porch: 1873 ns
Blanking Interval: 3.465 ms
Front Porch: 258 ns
Sync Pulse: 1335 ns

Vertical

Vert Freq: 66.5 Hz
Active Video: 14.485 ms
Blanking Interval: 39 horizontal lines
Front Porch: 3 horizontal lines
Sync Pulse: 3 horizontal lines
Vertical Period: 15.035 ms

When it`s possible, how can I set it up?

Thanks in advance

Str@ight

[PAugustin]

yes no problem the G400 will perfectly drive this monitor.

What do you mean by setting it up ??? If you talk about the card, all you will need to do is to change the resolution/refresh rate in the Powerdesk (Matrox driver) to whatever suits you.

Edit: I just saw it was a monitor with fixed res/refresh. Still the G400 can outpout 1280*1024@100Hz perfectly. I just don't know how it works with that kind of monitors.

[Str@ight]

The problem is that I cannot define that resolution.

Can u explain how to create a user defined monitor with that parameters within Powerdesk?

[Str@ight]

Currently I`m playing with PowerStrip a bit around.
There I can define my own resolutions for the monitor...

But I dont really know how to set them correctly...

EDIT:
Ok i got it, i created a new resolution for that monitor...
Using the Dual Head function is really helpfull when playing around with resolution and synchronisation modes
Now I know that my G400 max is also able to snyc on green with a D-Sub Connector

Modifying / soldering the monitor itself wouldn`t have been necessary, but now the my monitor has normal sync and sync on green... nice feature i think...