G400 and DVI daughter card.

[D0ug]

is it at all possible to get 1600x1200 out of this dvi addon card? ive looked up the specs of the silicon image chip on this card and it can indeed support 1600x1200, so there must either be a hardware limitation of the g400 or software driver limitation keeping me from getting this resolution.

[D0ug]

is it at all possible to get 1600x1200 out of this dvi addon card? ive looked up the specs of the silicon image chip on this card and it can indeed support 1600x1200, so there must either be a hardware limitation of the g400 or software driver limitation keeping me from getting this resolution.

Is there anyone that knows anything about this?

[Mikko]

I believe you have this add-on card?

http://www.matrox.com/mga/products/upgrades/flat_panel_g400.cfm

Matrox G400 output of 112 MHz using the SIL-164 transmitter for a
maximum resolution of 1280 x 1024 @ 24-bit at millions of colors

Have you asked this question from Matrox Tech Support directly?

http://forum.matrox.com/mga/index.php

[D0ug]

I believe you have this add-on card?

http://www.matrox.com/mga/products/upgrades/flat_panel_g400.cfm

Have you asked this question from Matrox Tech Support directly?
http://forum.matrox.com/mga/index.php

No, i had not asked matrox tech support yet. I had read somewhere, that the max resolution was 1280x1024 @ 85Hz, so technically at 60Hz it should support 1600x1200, But i cant seem to get it to goto that resolution, the datasheet i have found for the chipset on the daughter card says that it supports 1600x1200.