G400, DHClone, Re-Volt Demo

[agallag]

When I run the Re-Volt Demo in clone mode, the image on the monitor is fine, but the image on the TV flickers like mad. Every resolution, colour depth, various other settings, all flicker. It doesn't flicker in any other 3d or 2d situations. Any ideas?

------------------
Andrew Gallagher - andrew@agallagher.com
Asus P2B-S, PII-350, 64MB PC100, 12.7GB Quantum Fireball EX ATA-33, 2x2.1GB Quantum Atlas I UWSCSI, Toshiba 6201 SCSI CD, Yamaha CRW4416S SCSI CD-RW, WangDAT SCSI, MillG400 32MB DH, SBLive! Retail (Plugged into a JVC RX884V Dolby Digital Receiver@500W), Dell 17" (first head), ProScan 27" NTSC TV (second head), Win98SE

[agallag]

Is no one getting this problem? Phil, you're a Re-Volt freak, you must have seen this. It's your fault anyway, if it wasn't for your glowing reviews on g200.com, I wouldn't be hooked on this damn demo

Andrew

[agallag]

If anyone's interested, the fix for my Expendable problems fixed this one too. I turnded off vga bios shadowing in the bios. It had been turned on after flashing my mobo bios, and I didn't notice it.

Well, I now have absolutely no problems with this card. So what am I supposed to complain about now?

------------------
Andrew Gallagher - andrew@agallagher.com
Asus P2B-S (1010), PII-350@350), 64MB PC100, 12.7GB Quantum Fireball EX ATA-33, 2x2.1GB Quantum Atlas I UWSCSI, Toshiba 6201 SCSI CD, Yamaha CRW4416S SCSI CD-RW, WangDAT SCSI, MillG400 32MB DH w/ 5ns RAM(5.25 Divers/1.5 Bios/Fo=310.5MHz), SBLive! Retail (LiveWare2.1), JVC RX884V Dolby Digital Receiver@500W, Dell D1728D-LS 17" Monitor (first head), ProScan 27" NTSC TV (second head), Win98SE, BeOS 4.5.1, RedHat 6.0, NT4SP5

[agallag]

Oops, wrong post. I actually fixed my random freezing problem with this game, not the flickering. I don't know what's causing this...

[This message has been edited by agallag (edited 09-12-1999).]