Went for the Max!

[Ralston]

Ok, I went ahead and sent for the Max, I appreciate all the help and advice thru these last couple of years. Ill keep you posted! Thanks!

[Ralston]

I forgot to ask, I guess I ought to remove my sli setup before I clean install the Max? Please advse...

[the FooL]

Depends.
If you have a PIII or an Athlon, then yeah, it should be fine to dump the SLI setup.
I think you can just uninstall the drivers in the Add/Remove control panel.

Since I only have a Celery, I still run the G400 and SLI setup...
I was able to overclock the Marvel G400 to MAX specs.

[Maggi]

If you want to keep your SLI in your system, make sure to change the 'VGA Boot Sequence' or what it might be called in your MoBo BIOS.

That switch is usually defaulted to 'PCI/AGP' and should be set to 'AGP/PCI' in order to determine your AGP card as the primary display adapter.


------------------
Cheerio,
Maggi

Home rig:
Celeron333A @ 500MHz
Asus P2B-S @ 100MHz FSB
2x 128MB CAS2 SDRAM
Matrox G400 @ 150/200MHz core/mem clock
... and some other goodies ...