Tweet
No Game runs with OpenGL and G400 (PII)
Can anyone help me??
Where to find the TurboGl does it work with PII?
I upgraded the matrox bios, formated my HD, installed Win98SE and the new matrox driver vers. 5.30.007., Q3 and Q3Tweak 1050, tryed to run Q3 and it doesn't work. PowerGl doesn't work easer because of no Athlon nor PIII installed. Changed the .cfg to 800*600 32 but it will not work. In 640*480 the colores are washed out. Withe the old G400icd.dll Version 5.13 the system crashes, withe new from 5.30.007 the monitor turns grey. After (<Strg>, <Alt> and <delete> the Q3 screen turns up again and says
...initializing QGL
...calling LoadLibrary( 'C:\WINDOWS\SYSTEM\opengl32.dll' ): succeeded
...setting mode 4: 800 600 FS
...using colorsbits of 32
...calling CDS: ok
...created window@0,0 (800x600)
Initializing OpenGL driver
----- CL_Shutdown -----
RE_Shutdown( 1 )
Shutting down OpenGL subsystem
Direct 3D runs fine but Games with OpenGl allway crush. The old G400icd works with "unreal" 1 f per minute great!!
The old system with VoodoII worked. No the fresh formated and new installed hangs with GL
Anyone any Idea what to do
Greatings Hoolie
My System:
G400 DualHead (not max)Power desk 5.30.007, Bios 1.5 - 22, rest 4.11.01.1300/ DualHead disabled/ DirectX 7.0/ Win98SE/ Gigabyte motherboard/ 1*128 + 3* 32 mb RAM (66Hz), Celeron 366 no overclock
/ Adaptec AH2940 UW, Plextor PX 20TS and Traxdata 4120-CDR/ IBM- DCAS-32160, -34330W, DDRS-39130W and DORS-32160 HDD/ EIZO FlexScan F67 monitor/ Acermodom 56/ Fast Ethernet 100Mbps PCI Adapter/ Soundblaster Live (Full, 44 kHz)/ HP Wheelmouse
Where to find the TurboGl does it work with PII?
I upgraded the matrox bios, formated my HD, installed Win98SE and the new matrox driver vers. 5.30.007., Q3 and Q3Tweak 1050, tryed to run Q3 and it doesn't work. PowerGl doesn't work easer because of no Athlon nor PIII installed. Changed the .cfg to 800*600 32 but it will not work. In 640*480 the colores are washed out. Withe the old G400icd.dll Version 5.13 the system crashes, withe new from 5.30.007 the monitor turns grey. After (<Strg>, <Alt> and <delete> the Q3 screen turns up again and says
...initializing QGL
...calling LoadLibrary( 'C:\WINDOWS\SYSTEM\opengl32.dll' ): succeeded
...setting mode 4: 800 600 FS
...using colorsbits of 32
...calling CDS: ok
...created window@0,0 (800x600)
Initializing OpenGL driver
----- CL_Shutdown -----
RE_Shutdown( 1 )
Shutting down OpenGL subsystem
Direct 3D runs fine but Games with OpenGl allway crush. The old G400icd works with "unreal" 1 f per minute great!!
The old system with VoodoII worked. No the fresh formated and new installed hangs with GL
Anyone any Idea what to do
Greatings Hoolie
My System:
G400 DualHead (not max)Power desk 5.30.007, Bios 1.5 - 22, rest 4.11.01.1300/ DualHead disabled/ DirectX 7.0/ Win98SE/ Gigabyte motherboard/ 1*128 + 3* 32 mb RAM (66Hz), Celeron 366 no overclock
/ Adaptec AH2940 UW, Plextor PX 20TS and Traxdata 4120-CDR/ IBM- DCAS-32160, -34330W, DDRS-39130W and DORS-32160 HDD/ EIZO FlexScan F67 monitor/ Acermodom 56/ Fast Ethernet 100Mbps PCI Adapter/ Soundblaster Live (Full, 44 kHz)/ HP Wheelmouse
Comment