Announcement

Collapse
No announcement yet.

Slow Motion in UT after v-command

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Slow Motion in UT after v-command

    Check your key bindings. It sounds like you're turning auto-run off.
    Gigabyte P35-DS3L with a Q6600, 2GB Kingston HyperX (after *3* bad pairs of Crucial Ballistix 1066), Galaxy 8800GT 512MB, SB X-Fi, some drives, and a Dell 2005fpw. Running WinXP.

  • #2
    Slow Motion in UT after v-command

    Hello,

    I have the following strange behaviour in UT.
    After I issue a v-command (in an Assault
    level), e.g. to order the bots to attack,
    I can only move *very* slowly. Guess who
    gets fragged first.....aaarrgghhh <respawn>

    The last patch I used was 413. It directly
    reduced my FPS drastically. After I restored
    the original D3D driver in the system dir
    it worked again. But the problem with the
    v-command seems unrelated to this.

    Any suggestions?

    Regards,

    Matt Houben
    Maastricht, the Nertherlands
    matt.houben@eurocontrol.be
    ----------------------------------
    System:
    ASUS P2B MB with 64MB RAM
    Celeron 400MHz@400MHz
    3.5" + 5.25" FDD
    Quantum Fireball EX 6 GB HDD
    Seagate Barracuda 20 GB HDD
    Matrox Millennium G200 AGP
    SB Live!
    HP8100i CD-RW


    ASUS P2B rev. 1.10 motherboard | 640 MB 100Mhz CAS 2-2-2 SD-RAM | P!!!-800 MHz @ 800 MHz CPU | Matrox Millennium G200 AGP 8 MB | Soundblaster Live! with digital I/O | Quantum Fireball EX 6 GB UDMA/33 HDD [C,D] | Seagate Barracuda 20 GB UDMA/66 HDD [E,F,G] | HP8100i CD-RW 24x/4x/2x [X] | 3.5" FDD [A]
    | 5.25" FDD [B] | Momenta 56K fax/voice/modem | HP4100c USB scanner | HP LJ-5L printer | OS: Win98: All HD partitions FAT32

    Comment


    • #3
      Oh yes, I forgot to mention:

      The game itself run normally, all the bots
      run around at their normal fast pace.
      It's just me who is slow like a turtle.

      Regards,

      Matt
      ASUS P2B rev. 1.10 motherboard | 640 MB 100Mhz CAS 2-2-2 SD-RAM | P!!!-800 MHz @ 800 MHz CPU | Matrox Millennium G200 AGP 8 MB | Soundblaster Live! with digital I/O | Quantum Fireball EX 6 GB UDMA/33 HDD [C,D] | Seagate Barracuda 20 GB UDMA/66 HDD [E,F,G] | HP8100i CD-RW 24x/4x/2x [X] | 3.5" FDD [A]
      | 5.25" FDD [B] | Momenta 56K fax/voice/modem | HP4100c USB scanner | HP LJ-5L printer | OS: Win98: All HD partitions FAT32

      Comment

      Working...
      X