Tweaking a AMD 1 gig +Asus A7V133

[scruff35]

I`m running Seti client on Windows 2000 Pro.I`ve read your tweak section and could not find some of my bios info. that i need to change.I`m using 768mb of sdram(pc133),my cpu is a Thunderbird 1 gig. 266fsb.I have Ramdisk NT installed with Seti in it.My time with a 4.10 teraflop data pack is 6 hours & 23 minutes.I`m sure i can get a better time than this.If someone has the same board as i do can you please post your bios setup or e-mail me.Thanks in advance.scruff35.

[Guru]

Yeh I know the guide is not realy up to date! I'm working on a new version!

SDRAM CAS Latency Time: 2

SDRAM Cycle Time Tras/Trc : lower the beter

SDRAM RAS-to-CAS Delay: 2

SDRAM RAS Precharge Time: 2

SDRAM Cycle Length: 2

SDRAM Leadoff Command: 3

SDRAM Bank Interleave: 4way

SDRAM Precharge Control : Enable

DRAM Data Integrity Mode: Non ECC

Read-Around-Write: Enable

System BIOS Cacheable: Dissable

System BIOS/RAM Cacheable: dissable

8-bit/16-bit I/O Recovery Time : 1 or NA

Passive Release: Enable

Delayed Transaction/PCI 2.1 Compliance: Enable


Spread Spectrum: Disable

DRAM Read Latch Delay: Disable

DRAM Interleave Time: As low as possible

Byte Merge: Enabled


PCI Pipeline / PCI Pipelining: enabled

Fast R-W Turn Around: Enabled

CPU to PCI Write Buffer: Enabled

PCI Dynamic Bursting : Enabled

PCI Master 0 WS Write: enabled
PCI Delay Transaction: enabled

PCI#2 Access #1 Retry: enabled

Delay DRAM Read Latch: Auto or no delay

SDRAM Page Closing Policy : one bank
Force 4-Way Interleave : enabled

PCI Latency Timer : try increasing to 64-128

Hope this helps! If there is any oyher setting you want to know feel fre to ask! Stay tuned for more info in my upcomming guide!

[scruff35]

Thanks for the quick response.I`m stuck going shopping with the wife so i`ll try updating later.Thanks again.scruff35.