Tweet
I have been messing with MGATweak, on my Marvel G200-TV AGP. I have found that with the default divider, when i get to a MClk of about 122-125, i start getting defects. (damn SDRAM) this is with all SDRAM optimizations maxed. I have a fan on my G200, so i figured i should be able to raise the chip higher than that, so i increased the memory divider up to 2.0. That way i can increase my SClk higher, and not hit that memory limit. I found that i could increase it all the way up to a 249.75 SClk (124.88 on all clocks) and everything still runs completely stable. I will play further, but i know my memory doesn't like going much faster, so i'm sure it won't be near as stable.
One other note. I have an SB Live! Platinum, and i found that at times when the Video card is hogging the bus, i get sound breaks and loops. I turned off the PCI retry setting (which gave a VERY slight decrease on the graphics, but it cleared up my sound perfectly.)
Fuzz
One other note. I have an SB Live! Platinum, and i found that at times when the Video card is hogging the bus, i get sound breaks and loops. I turned off the PCI retry setting (which gave a VERY slight decrease on the graphics, but it cleared up my sound perfectly.)
Fuzz
Comment