600 BHP w/enhancements by McLaren
![](http://digitalvideo.8m.net/viper/viper1.jpg)
![](http://digitalvideo.8m.net/viper/viper2.jpg)
![](http://digitalvideo.8m.net/viper/viper3.jpg)
Gizmag article....
![](http://digitalvideo.8m.net/viper/viper1.jpg)
![](http://digitalvideo.8m.net/viper/viper2.jpg)
![](http://digitalvideo.8m.net/viper/viper3.jpg)
Gizmag article....
January 15, 2007 One of the most brutal cars on the road will become even moreso next year when the Dodge Viper SRT10 will be packing 90 extra horsepower from its new 8.4-liter Viper V-10 engine, delivering an astounding 600 horsepower and 560 lb.-ft. of torque. The new 2008 Viper SRT10 will run from 0-60 mph in under four seconds, and deliver 0-100-0 mph performance in just over 12 seconds, braking in under 100 feet.
The new 2008 Dodge Viper SRT10 will arrive in Dodge showrooms in North America this summer with a new level of customization options, including five new exterior colors, four new interior color combinations and a new wheel design.
When SRT powertrain engineers set out to get more venom from the 2008 Dodge Viper SRT10’s powerplant, their objectives included not only increasing performance, but also complying with stringent regulatory requirements, such as federal Tier 2, Bin 5 and California’s Low Emissions Vehicle (LEV) 2 mandates.
Working with specialists from McLaren Performance Technologies and Ricardo, Inc., SRT engineers began by following the racer’s basic formula for more power: bigger displacement, more efficient breathing and higher engine speed.
The new Dodge Viper SRT10’s deep-skirted V-10 aluminum engine block was revised for a 1-millimeter larger bore, raising the displacement to 8.4 liters from 8.3 liters. With strengthened bulkheads and improved water jackets for better cooling, the block includes pressed-in iron cylinder liners and cross-bolted main bearing caps for strength and durability.
>
The new 2008 Dodge Viper SRT10 will arrive in Dodge showrooms in North America this summer with a new level of customization options, including five new exterior colors, four new interior color combinations and a new wheel design.
When SRT powertrain engineers set out to get more venom from the 2008 Dodge Viper SRT10’s powerplant, their objectives included not only increasing performance, but also complying with stringent regulatory requirements, such as federal Tier 2, Bin 5 and California’s Low Emissions Vehicle (LEV) 2 mandates.
Working with specialists from McLaren Performance Technologies and Ricardo, Inc., SRT engineers began by following the racer’s basic formula for more power: bigger displacement, more efficient breathing and higher engine speed.
The new Dodge Viper SRT10’s deep-skirted V-10 aluminum engine block was revised for a 1-millimeter larger bore, raising the displacement to 8.4 liters from 8.3 liters. With strengthened bulkheads and improved water jackets for better cooling, the block includes pressed-in iron cylinder liners and cross-bolted main bearing caps for strength and durability.
>
Comment