CPU temperature

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • knirfie
    MURCer
    • Mar 2002
    • 789
    #1

    CPU temperature

    What temperature is ok for a processor(celeron, coppermine core) to work on? Just a few minutes ago I noticed that both the blowers on my heatsink had stopped for some reason, but the temperature didn't exceed 81 degrees celcius (at 100% CPU useage), that's only 5 degrees more then when the blowers do work.
    Main Machine: Intel Q6600@3.33, Abit IP-35 E, 4 x Geil 2048MB PC2-6400-CL4, Asus Geforce 8800GTS 512MB@700/2100, 150GB WD Raptor, Highpoint RR2640, 3x Seagate LP 1.5TB (RAID5), NEC-3500 DVD+/-R(W), Antec SLK3700BQE case, BeQuiet! DarkPower Pro 530W
    Tags: None
    • Novdid
      Super MURCer
      • Nov 2000
      • 2609
      #2
      That's ver very high!

        Comment

        • Greebe
          Super MURCer
          • Aug 1999
          • 8555
          #3
          Are you sure the HS is even coming in contact with the cpu?!
          "Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind." -- Dr. Seuss

          "Always do good. It will gratify some and astonish the rest." ~Mark Twain

            Comment

            • RedRed
              Super MURCer
              • May 2000
              • 2423
              #4
              5.......




              4.......




              3.......





              2........






              1........





              KaBoom!

              Seriously, are you sure that the sensor/monitoring software is working? was it C or F?

              If it was C and its working your machine will start to suffer from random hangs, I bet.....

              it shouldnt take out the chip though (I think!)
              Dont just swallow the blue pill.

                Comment

                • Wulfman
                  Super MURCer
                  • Oct 2000
                  • 1662
                  #5
                  are the fans really blowing air onto the hs? maybe they were flipped...

                  mfg
                  wulfman
                  "Perhaps they communicate by changing colour? Like those sea creatures .."
                  "Lobsters?"
                  "Really? I didn't know they did that."
                  "Oh yes, red means help!"

                    Comment

                    • knirfie
                      MURCer
                      • Mar 2002
                      • 789
                      #6
                      Originally posted by Greebe
                      Are you sure the HS is even coming in contact with the cpu?!
                      this is an overclocked celeron, now running with a heatsink that definetly wasnt meant for passive cooling, but still no hangs

                      when i close all programms it comes back to 58 degrees celcius (but the fans still wont turn for some reason).
                      Last edited by knirfie; 17 December 2002, 13:08.
                      Main Machine: Intel Q6600@3.33, Abit IP-35 E, 4 x Geil 2048MB PC2-6400-CL4, Asus Geforce 8800GTS 512MB@700/2100, 150GB WD Raptor, Highpoint RR2640, 3x Seagate LP 1.5TB (RAID5), NEC-3500 DVD+/-R(W), Antec SLK3700BQE case, BeQuiet! DarkPower Pro 530W

                        Comment

                        • Greebe
                          Super MURCer
                          • Aug 1999
                          • 8555
                          #7
                          hate to say this guy but a block of lead would cool it better than that thing
                          "Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind." -- Dr. Seuss

                          "Always do good. It will gratify some and astonish the rest." ~Mark Twain

                            Comment

                            • knirfie
                              MURCer
                              • Mar 2002
                              • 789
                              #8
                              Originally posted by Greebe
                              hate to say this guy but a block of lead would cool it better than that thing
                              well i have to say it's doing a pretty good job passivly
                              Main Machine: Intel Q6600@3.33, Abit IP-35 E, 4 x Geil 2048MB PC2-6400-CL4, Asus Geforce 8800GTS 512MB@700/2100, 150GB WD Raptor, Highpoint RR2640, 3x Seagate LP 1.5TB (RAID5), NEC-3500 DVD+/-R(W), Antec SLK3700BQE case, BeQuiet! DarkPower Pro 530W

                                Comment

                                • dZeus
                                  Moderator
                                  • Aug 2000
                                  • 4622
                                  #9
                                  81 C is waaaaaaay too high.

                                  Get a real HSF, or risk burning out your CPU within the very near future.

                                    Comment

                                    • Greebe
                                      Super MURCer
                                      • Aug 1999
                                      • 8555
                                      #10
                                      I wouldn't... you are right at the point the silicon would be permanently damaged
                                      "Be who you are and say what you feel, because those who mind don't matter, and those who matter don't mind." -- Dr. Seuss

                                      "Always do good. It will gratify some and astonish the rest." ~Mark Twain

                                        Comment

                                        • CaineTanathos
                                          MURCer
                                          • May 2002
                                          • 284
                                          #11
                                          81 degrees isn't a good job
                                          unless you are burning in
                                          Hey! You're talking to me all wrong! It's the wrong tone! Do it again...and I'll stab you in the face with a soldering iron

                                            Comment

                                            • knirfie
                                              MURCer
                                              • Mar 2002
                                              • 789
                                              #12
                                              well, i would have expected it to reach higher temps if the fans ever failed. I've removed the HS and installed an old socket 7 HS with working fan, temp doesnt exceed 70 degrees now when stress-testing, is that better?

                                              p.s. what kind of HS should I get, i'm not trusting my system to a socket 7 cooler
                                              Main Machine: Intel Q6600@3.33, Abit IP-35 E, 4 x Geil 2048MB PC2-6400-CL4, Asus Geforce 8800GTS 512MB@700/2100, 150GB WD Raptor, Highpoint RR2640, 3x Seagate LP 1.5TB (RAID5), NEC-3500 DVD+/-R(W), Antec SLK3700BQE case, BeQuiet! DarkPower Pro 530W

                                                Comment

                                                • CaineTanathos
                                                  MURCer
                                                  • May 2002
                                                  • 284
                                                  #13
                                                  just ask for a Pentium 3 heatsink, most of them are pretty good
                                                  how fast is your cpu ? (MHZ)
                                                  Hey! You're talking to me all wrong! It's the wrong tone! Do it again...and I'll stab you in the face with a soldering iron

                                                    Comment

                                                    • knirfie
                                                      MURCer
                                                      • Mar 2002
                                                      • 789
                                                      #14
                                                      it's running at 1364mhz (124*11)
                                                      Main Machine: Intel Q6600@3.33, Abit IP-35 E, 4 x Geil 2048MB PC2-6400-CL4, Asus Geforce 8800GTS 512MB@700/2100, 150GB WD Raptor, Highpoint RR2640, 3x Seagate LP 1.5TB (RAID5), NEC-3500 DVD+/-R(W), Antec SLK3700BQE case, BeQuiet! DarkPower Pro 530W

                                                        Comment

                                                        • CaineTanathos
                                                          MURCer
                                                          • May 2002
                                                          • 284
                                                          #15
                                                          most P3 HS are made for 1600mhz processors
                                                          it normally written on the box of the HS

                                                          just say in the store you need a P3 HS for a 1400 mhz P3
                                                          (and if they make the "a 1400mhz P3???"-face, just tell them its a Tualatin )
                                                          Hey! You're talking to me all wrong! It's the wrong tone! Do it again...and I'll stab you in the face with a soldering iron

                                                            Comment

                                                            Previous 1 2 3 template Next
                                                            Working...