RR & drivers for 2K/XP with MJPEG

[pcombs]

Where did they go?

I downloaded the drivers last fall, but my web site link is now dead.

Have the drivers been updated, and if so, where are they now?

[irios]

Oki... after struggling for days trying to get the Marvel box to deliver sound to my system I finally gave up
After a few attempts trying to fix my problems by editing the registry, things just got worse, and my tuner didnt work at all anymore ---

---- so I did a clean reinstallation of windoze

... and now (for some strange reason) everything works as it should :-) I even have sound on my Marvel
yey

[Job]

Here is the listing I'm working to for G400/RRG.

I repeat this is for RRG - Not RRS! There is no know patch yet for XP andRRS! Nicram and co are apparently still wroking on it.

Video Drivers 5.86 (5.86.032) ftp://ftp.matrox.com/pub/mga/archiv...02/2kxp_586.exe
VT version vt_210a (2.10.010a) ftp://ftp.matrox.com/pub/mga/archiv...001/vt_210a.exe
MV-vtools-2.10.010a-eng-2K-XP (disables macrovision) http://forums.murc.ws/attac...=&postid=233142
rr update for 2.10.010a.zip (patches for XP) http://www.matrox.3d.pl/rrupdfor110010a.zip
PICVideo MJPEG Codec Loaded ftp://ftp.pictools.com/picvideo/PICVIDEO2.EXE
HUFFYUY2 Codec Loaded http://math.berkeley.edu/~benrg/huffyuv.html
yuy2w2k.exe loaded to enabled or disable YUY2 if needed http://digitalvideo.8m.net/yuy2w2k.zip

Havent as yet got it working - but very anxious to see if it works for me!

The difference I see here is that it states Drivers 5.86 where as you state 5.39....is this correct?

[Nicram]

This link should work too :

http://www.matrox.poleko.pl/software/rr%20update%20for%202.10.010a.zip

[Job]

Nicram....Good to get a hold of you....

I was going to ask you....

1. What version BIOS should be running on my G400 DH 32 MB SGRAM card - does it matter?

2. How do I nstall the 210.10 pack? It's not a self extracter etc....do I simply copy the files over to the folder and over the ones already there?

[Job]

Sorry....rrupdfor110010a.zip

file not 210....sorry to mislead you....

[fabri]

I have the red button!
Thank you Nicram!

Your patch worked fine here.
No audio problems.

Win XP
G400 DH (bios 2.1 b35 / drivers 2kxp_586)
RRunner G (drivers vt_210a)

[Nicram]

Job in zip should be .txt files. Read it
I don't know about any BIOS version that don't work. Just use newst

[Job]

Wel!!!...I have the red Button too...

Worked a treat!...until....

I went to record....I can record - but it is very unstable.
Played aound with it all weekend, but the MJPEG capture was dropping 50frames per 5 minutes or would fail to intiate video capture and I would only capture sound. YUY2 is no problem at all - but to files only allow 18mins on 25GB!!!

I have now gone back to the dual boot option with XP as my default but 98Se for caputre purposes until when/if I can sort things out better.

Premiere in XP seemed okay but a few niggles have left me a little suspcious - so time will tell there.....

Anyway - Nicram!/Flipe - Thanks a mill. The picture and the sound is great!

Oh - I havent been able to record with VDub either yet. More work there for me.

Cheers!

[andyjustice]

I want do install capture drivers for my rainbow runner STUDIO (Mystique) on Windows 2000. I don't need MJPEG as I will only be capturing 5 minute clips and have loads of disk space.

It looks like if I could get my hands on this file - http://www.geocities.com/adis987/VTSRV.zip - I would be able to install the NT capture drivers, but the site - http://www.geocities.com/adis987/ - is down.....

Any ideas (or new links)?

A

[Job]

If you've read the thread....

this patch is only for the RRG not the RRS.
If you only want to capture 5mins - I have no problems with that with my G400Dually+RRG on a Via266DDRX mobo - but files any greater than 400MB and I get a file error.

[Adis]

Originally posted by andyjustice
I want do install capture drivers for my rainbow runner STUDIO (Mystique) on Windows 2000. I don't need MJPEG as I will only be capturing 5 minute clips and have loads of disk space.

It looks like if I could get my hands on this file - http://www.geocities.com/adis987/VTSRV.zip - I would be able to install the NT capture drivers, but the site - http://www.geocities.com/adis987/ - is down.....

Any ideas (or new links)?

A

http://adis.szm.com/ here is new link to my page

There you can download NEW VideoTools 02.04.15a


Adis

[Adis]

And other Marvel G400-TV users who wants to enable this card on WinXP - visit my page http://adis.szm.com/

This works fine and stable!

Enjoy in you G400-TV/WinXP system!


Adis

[andyjustice]

Thanks for the new link.

I want to be able to install the RRStudio (Mystique - not Gxxx series) WinNT drivers on Win2K.

At the moment if I try installing Video Tools i get "PowerDesk Not Installed" (when it is) and if I install the driver i get a "This installation is for Windows NT 4 only" error.

[Job]

YEs - unfortunately....

you'll have to sit in the que like most of us for a couple of years....

So far I think there is Nicram's RRG patch and Adis's Marvel Patch for XP (no red button) - but not one for the RRS Mystique for 2K AFAIK....
I think you might be more successfull with a setup for XP now - 2K was an interim package...XP will be 'round for a few year - like 98SE....