Announcement

Collapse
No announcement yet.

Gaming Mystery (added Info)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gaming Mystery (added Info)

    I have a Pentium 266 and 160 megs of ram and a voodoo2 on one pc and it rocks. Online and off it has exellent preformance with unreal tournament and other demanding games. I now also have a PIII 1GHz with 256Mb of 133 ram and a voodoo3 which freezes is jerky and is close to unplayable with these type of games. This was also a problem with my AMD k-6 400 with 320Mb PC100 ram and the same card. I have also mix and matched the voodoo cards with no change in preformance. Does anybody have solutions or suggestions?

    I'll look into chipset drivers(are these for proccesser or MB chipset?)
    Here is info about the non-working and working systems:

    USES VOODOO2
    Microsoft Windows 98 4.10.2222 A
    Normal mode
    GenuineIntel x86 Family 6 Model 8 Stepping 6
    PIII 1000Mhz
    240MB RAM


    0 System timer
    1 Standard 101/102-Key or Microsoft Natural Keyboard
    2 Programmable interrupt controller
    4 Communications Port (COM1)
    6 Standard Floppy Disk Controller
    7 ECP Printer Port (LPT1)
    8 System CMOS/real time clock
    9 CMI8738/C3DX PCI Audio Device
    9 IRQ Holder for PCI Steering
    10 SiS 7001 PCI to USB Open Host Controller
    10 SiS 7001 PCI to USB Open Host Controller
    10 IRQ Holder for PCI Steering
    11 HSP56 MicroModem
    11 SiS 900 PCI Fast Ethernet Adapter
    11 IRQ Holder for PCI Steering
    12 PS/2 Compatible Mouse Port
    13 Numeric data processor
    14 Primary IDE controller (dual fifo)
    14 SiS 5513 Dual PCI IDE Controller
    15 Secondary IDE controller (dual fifo)
    15 SiS 5513 Dual PCI IDE Controller
    3 (free)
    5 (free)

    [Conflicts/Sharing]

    IRQ 9 CMI8738/C3DX PCI Audio Device
    IRQ 9 IRQ Holder for PCI Steering
    IRQ 10 SiS 7001 PCI to USB Open Host Controller
    IRQ 10 SiS 7001 PCI to USB Open Host Controller
    IRQ 10 IRQ Holder for PCI Steering
    IRQ 11 HSP56 MicroModem
    IRQ 11 SiS 900 PCI Fast Ethernet Adapter
    IRQ 11 IRQ Holder for PCI Steering
    IRQ 14 Primary IDE controller (dual fifo)
    IRQ 14 SiS 5513 Dual PCI IDE Controller
    IRQ 15 Secondary IDE controller (dual fifo)
    IRQ 15 SiS 5513 Dual PCI IDE Controller


    [DMA]

    1 C-Media PCI Audio Legacy Device
    2 Standard Floppy Disk Controller
    3 ECP Printer Port (LPT1)
    4 Direct memory access controller
    5 C-Media PCI Audio Legacy Device
    0 (free)
    6 (free)
    7 (free)

    [Memory]

    x00000000 - x0009FBFF System board extension for PnP BIOS
    x0009FC00 - x0009FFFF System board extension for PnP BIOS
    x000A0000 - x000AFFFF SiS 630/730
    x000B0000 - x000BFFFF SiS 630/730
    x000C0000 - x000CBFFF SiS 630/730
    x000CC000 - x000D3FFF SiS 900 PCI Fast Ethernet Adapter
    x000F0000 - x000FFFFF System board extension for PnP BIOS
    x00100000 - x0EFFFFFF System board extension for PnP BIOS
    xC5C00000 - xD5CFFFFF PCI standard PCI-to-PCI bridge
    xC8000000 - xCFFFFFFF SiS 630/730
    xD6000000 - xD6FFFFFF Voodoo2 3D Accelerator
    xD7E00000 - xD7EFFFFF PCI standard PCI-to-PCI bridge
    xD7EE0000 - xD7EFFFFF SiS 630/730
    xE0000000 - xEFFFFFFF PCI standard host CPU bridge
    xF7FFD000 - xF7FFDFFF SiS 900 PCI Fast Ethernet Adapter
    xF7FFE000 - xF7FFEFFF SiS 7001 PCI to USB Open Host Controller
    xF7FFF000 - xF7FFFFFF SiS 7001 PCI to USB Open Host Controller
    xF8000000 - xF8000FFF PCI bus
    xFFE80000 - xFFEEFFFF PCI bus
    xFFEF0000 - xFFEFFFFF System board extension for PnP BIOS
    xFFFE0000 - xFFFEFFFF PCI bus
    xFFFF0000 - xFFFFFFFF System board extension for PnP BIOS


    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXX

    NEXT SYSTEM(works) WITH VOODOO3
    Microsoft Windows 98 4.10.2222 A

    Normal mode


    GenuineIntel Pentium(r) II Processor 266Mhz
    160MB RAM





    [DMA]

    1 Maestro DOS Games/FM Devices (DOS)
    2 Standard Floppy Disk Controller
    3 ECP Printer Port (LPT1)
    4 Direct memory access controller
    0 (free)
    5 (free)
    6 (free)
    7 (free)

    [IRQs]

    0 System timer
    1 Standard 101/102-Key or Microsoft Natural Keyboard
    2 Programmable interrupt controller
    4 Communications Port (COM1)
    5 Maestro Enumerator
    5 Maestro Wave / WaveTable Synthesis Devices
    5 Maestro Device Manager
    5 IRQ Holder for PCI Steering
    6 Standard Floppy Disk Controller
    7 ECP Printer Port (LPT1)
    8 System CMOS/real time clock
    9 3dfx Voodoo3
    9 IRQ Holder for PCI Steering
    10 3Com EtherLink 10 ISA TPO (3C509b-TPO) in PnP mode
    11 Intel 82371AB/EB PCI to USB Universal Host Controller
    11 IRQ Holder for PCI Steering
    12 PS/2 Compatible Mouse Port
    13 Numeric data processor
    14 Primary IDE controller (dual fifo)
    14 Intel 82371AB/EB PCI Bus Master IDE Controller
    15 Secondary IDE controller (dual fifo)
    15 Intel 82371AB/EB PCI Bus Master IDE Controller
    3 (free)

    [Conflicts/Sharing]

    IRQ 5 Maestro Enumerator
    IRQ 5 Maestro Wave / WaveTable Synthesis Devices
    IRQ 5 Maestro Device Manager
    IRQ 5 IRQ Holder for PCI Steering
    IRQ 9 3dfx Voodoo3
    IRQ 9 IRQ Holder for PCI Steering
    IRQ 11 Intel 82371AB/EB PCI to USB Universal Host Controller
    IRQ 11 IRQ Holder for PCI Steering
    IRQ 14 Primary IDE controller (dual fifo)
    IRQ 14 Intel 82371AB/EB PCI Bus Master IDE Controller
    IRQ 15 Secondary IDE controller (dual fifo)
    IRQ 15 Intel 82371AB/EB PCI Bus Master IDE Controller


    [DMA]

    1 Maestro DOS Games/FM Devices (DOS)
    2 Standard Floppy Disk Controller
    3 ECP Printer Port (LPT1)
    4 Direct memory access controller
    0 (free)
    5 (free)
    6 (free)
    7 (free)



    [Memory]

    x00000000 - x0009FFFF System board extension for PnP BIOS
    x000A0000 - x000AFFFF 3dfx Voodoo3
    x000B0000 - x000BFFFF 3dfx Voodoo3
    x000C0000 - x000C7FFF 3dfx Voodoo3
    x000E0000 - x000E3FFF Motherboard resources
    x000E4000 - x000FFFFF System board extension for PnP BIOS
    x00100000 - x09FFFFFF System board extension for PnP BIOS
    x0A000000 - x0A00FFFF 3dfx Voodoo3
    xF6000000 - xF7FFFFFF 3dfx Voodoo3
    xF8000000 - xFBFFFFFF Intel 82443LX/EX Pentium(r) II Processor to PCI bridge
    xFC000000 - xFDFFFFFF 3dfx Voodoo3
    xFFF80000 - xFFFBFFFF System board extension for PnP BIOS
    xFFFC0000 - xFFFFFFFF Motherboard resources
    Last edited by collinsnet; 7 July 2001, 17:10.

  • #2
    Welcome to M U R C

    Doesn't that SIS chipset have built-in vid? Hopefully you have it disabled wile trying to run the VooDoo3. The tip-off is you say '240 Meg of RAM'. If the on-board SIS is disabled, then you should be reporting 256MB of RAM.

    BTW, SIS is

    Comment


    • #3
      well I can't see an irq for your voodoo3 in your list which may account for your game playing problems.
      EchoWars couid well be in the money here!

      Comment


      • #4
        It could also be graphic configs for the game itself. For example in Half-Life there are numerous configs that are "behind the scenes" that need the user to open them up in notepad and do some editing to get the best performance. So someone with a nice system, but bad config (for the system) might not do as well as someone who tweaked their config to their system specs. I know that HL has sites that help with tweaking, but not sure about UT and others.
        Gigabyte GA-K8N Ultra 9, Opteron 170 Denmark 2x2Ghz, 2 GB Corsair XMS, Gigabyte 6600, Gentoo Linux
        Motion Computing M1400 -- Tablet PC, Ubuntu Linux

        "if I said you had a beautiful body would you take your pants off and dance around a bit?" --Zapp Brannigan

        Comment


        • #5
          the big macine has the voodoo2 the 266 has the voodoo3

          the voodoo3 is in the 266 and the voodoo2 is in the 1000 but I have swiched this with no effect to either system

          Comment


          • #6
            Gave ya a hint already, but I'll say it again...

            One word...

            SIS

            Put the V3 in the 1giger and figure out to disable the SIS. Perhaps you can't

            Comment


            • #7
              There is no mystery there is only SIS!

              Even if it can't be disabled in bios it IS stil possible to do it in system manager in windows!

              Does the blue 15 pin vga(female) connector sit besides the green 9(male) serial connector?
              If there's artificial intelligence, there's bound to be some artificial stupidity.

              Jeremy Clarkson "806 brake horsepower..and that on that limp wrist faerie liquid the Americans call petrol, if you run it on the more explosive jungle juice we have in Europe you'd be getting 850 brake horsepower..."

              Comment


              • #8
                Argh! C-media sound card! Disable that and try again. Try with a creative live or a 128 if you can.
                You may well be better off binning that mainboard though and getting one with a proper chipset

                Comment


                • #9
                  And when we say that you should disable the SIS we mean the onboard vga controller not everything with SIS in its name!
                  If there's artificial intelligence, there's bound to be some artificial stupidity.

                  Jeremy Clarkson "806 brake horsepower..and that on that limp wrist faerie liquid the Americans call petrol, if you run it on the more explosive jungle juice we have in Europe you'd be getting 850 brake horsepower..."

                  Comment


                  • #10
                    Originally posted by Technoid
                    And when we say that you should disable the SIS we mean the onboard vga controller not everything with SIS in its name!
                    LOL

                    Comment


                    • #11
                      Thanks for all your help everyone. I'll be doing some experimentation with what I have on hand but I may be back asking advice on a purchase. Thanks again.

                      Comment

                      Working...
                      X