My BIOS only goes up to 128MB Apeture size! will this be a problem?

[Pure3D]

I am getting a G400 but my BIOS only supports up to 128MB of Aperture Texture Size...will this be a problem?

Thanks

I have a Series Matsonic MS-7192SM motherboard. 4PCI, 2 ISA, 1 AGP. AGP is 1X but in BIOS, 2X can be enabled. Maximum aperture size is 128M, lowest I believe is 8M.

Thanks!

[This message has been edited by Pure3D (edited 01 November 1999).]

[Kruzin]

Should be OK....the 256meg problem only affects a few mobos with Pheonix BIOSes. You may want to check for an update to your mobo BIOS....it may now have a 256meg option...

[Zwisch]

that's fine... you should put it either to half the amount, or at worst the same amount, of your total amount of RAM in your system...

[absalom]

If you've got a game swapping 64 or more megs of texture data across the AGP bus then you've got other problems anyway

"I can't do it captain.... I just don't have the bandwidth!"