Announcement

**OzAndrew** · 10 June 2000, 23:06

Score: 3049, default test
---
Here's what it said.
CPU Intel Pentium III 600 Mhz
3D Accelerator Matrox Millennium G400 DualHead Max - English
Chipset Matrox G400 MAX
Resolution 768*1024
Z-Buffer Depth 16-bit
Frame Buffer Triple
Refresh Rate V Sync.Off
CPU Optimization Intel(R) Pentium(R) III

3DMark Result 3049 3D marks
CPU Speed 200 CPU 3D marks
Game 1 - Helicopter - Low Detail 63.4 FPS
Game 1 - Helicopter - Medium Detail 43.5 FPS
Game 1 - Helicopter - High Detail 18.7 FPS
Game 2 - Adventure - Low Detail 62.5 FPS
Game 2 - Adventure - Medium Detail 41.3 FPS
Game 2 - Adventure - High Detail 24.8 FPS
Fill Rate (Single-Texturing) 286.7 MTexels/s
Fill Rate (Multi-Texturing) 284.2 MTexels/s
High Polygon Count (1 Light) 2600 KTriangles/s
High Polygon Count (4 Lights) 2350 KTriangles/s
High Polygon Count (8 Lights) 2086 KTriangles/s
8MB Texture Rendering Speed 243.5 FPS
16MB Texture Rendering Speed 235.0 FPS
32MB Texture Rendering Speed 152.8 FPS
64MB Texture Rendering Speed Not enough AGP memory
Bump Mapping (Emboss, 3-pass) 107.2 FPS
Bump Mapping (Emboss, 2-pass) 136.4 FPS
Bump Mapping (Emboss, 1-pass) 243.2 FPS
Bump Mapping (Environment) 100.8 FPS
---
Asus P3B-F
64MB PC100
G400 MAX @%106.3 using Matrox's Tweak Utility with 5.55 drivers
P3 500 @ 600

What was really weird is when it tested my CPU it kept saying 7.50 FPS without going up or down in anyway, it just sat at exactly 7.50 but it was running at something like 200

[This message has been edited by OzAndrew (edited 11 June 2000).]

**Erich** · 11 June 2000, 16:03

3D Mark 2000 (AGP 1x, the card is not stable in AGP 2x with an AGP buss speed of 93Mhz):

CPU Intel Pentium III 840 Mhz
3D Accelerator Matrox Millennium G400 DualHead - English
Chipset Matrox G400
Resolution 1024*768
Z-Buffer Depth 16-bit
Frame Buffer Triple
Refresh Rate V Sync.Off
CPU Optimization Intel(R) Pentium(R) III

3DMark Result 3527 3D marks
CPU Speed 272 CPU 3D marks
Game 1 - Helicopter - Low Detail 71.5 FPS
Game 1 - Helicopter - Medium Detail 49.5 FPS
Game 1 - Helicopter - High Detail 21.8 FPS
Game 2 - Adventure - Low Detail 64.5 FPS
Game 2 - Adventure - Medium Detail 51.9 FPS
Game 2 - Adventure - High Detail 34.6 FPS
Fill Rate (Single-Texturing) 290.5 MTexels/s
Fill Rate (Multi-Texturing) 288.4 MTexels/s
High Polygon Count (1 Light) 2915 KTriangles/s
High Polygon Count (4 Lights) 2656 KTriangles/s
High Polygon Count (8 Lights) 2399 KTriangles/s
8MB Texture Rendering Speed 242.1 FPS
16MB Texture Rendering Speed 234.0 FPS
32MB Texture Rendering Speed 177.6 FPS
64MB Texture Rendering Speed 110.3 FPS
Bump Mapping (Emboss, 3-pass) 107.0 FPS
Bump Mapping (Emboss, 2-pass) 136.6 FPS
Bump Mapping (Emboss, 1-pass) 244.0 FPS
Bump Mapping (Environment) 101.7 FPS

---------------------------------------
Intel Pentium III 600E@840Mhz, 128MB, ASUS P3B-F ,Matrox Millennium G400 Max, IBM Deskstar 22GXP 22GB, Sound Blaster AWE32 PnP

[This message has been edited by Erich (edited 11 June 2000).]

[This message has been edited by Erich (edited 11 June 2000).]

JC · 14 June 2000, 03:22

I only built my new Athlon rig last night and I'm not particularly happy with the IRQs that are being dished out - my P3 was alot tidier.

G400 Max, 800x600x16, 3dMark2000 3d marks = 3578.

Before swapping cards around to change IRQs i was getting ~2700 - pants!

I expected more than this as my buddy with an Athlon 700 + V3 3000 gets over 3700 .

------------------
Athlon 850, 128MB PC133 Ram, G400Max, Abit KA7 MoBo, AWE64 Gold, 2940AU Scsi with 32x Reader and 4x4x16 Writer, Jaz and Zip, Card Cooler.

**Maggi** · 16 June 2000, 16:29

Code:

3DMark Result:	3340	3D marks
CPU Speed:	268	CPU 3D marks
Game 1 - Helicopter - Low Detail:	67,1	FPS
Game 1 - Helicopter - Medium Detail:	46,7	FPS
Game 1 - Helicopter - High Detail:	20,5	FPS
Game 2 - Adventure - Low Detail:	60,0	FPS
Game 2 - Adventure - Medium Detail:	49,9	FPS
Game 2 - Adventure - High Detail:	34,2	FPS
Fill Rate (Single-Texturing):	270,1	MTexels/s
Fill Rate (Multi-Texturing):	268,5	MTexels/s
High Polygon Count (1 Light):	2762	KTriangles/s
High Polygon Count (4 Lights):	2444	KTriangles/s
High Polygon Count (8 Lights):	2252	KTriangles/s
8MB Texture Rendering Speed:	224,8	FPS
16MB Texture Rendering Speed:	217,5	FPS
32MB Texture Rendering Speed:	169,8	FPS
64MB Texture Rendering Speed:	117,6	FPS
Bump Mapping (Emboss, 3-pass):	99,4	FPS
Bump Mapping (Emboss, 2-pass):	126,8	FPS
Bump Mapping (Emboss, 1-pass):	226,6	FPS
Bump Mapping (Environment):	98,9	FPS

Celeron 566 @ 952 MHz
G400 Vanilla 32MB DH @ 150/200

1024x768x16bpp
16bit Zbuffer
triple buffering
VSync off

Kick ass !

[This message has been edited by Maggi@Home (edited 17 June 2000).]

**Mickey Padge** · 17 June 2000, 02:53

3D Mark 2000 @ Default Setting always scores an Average of 3550 .
I have P3V4X Mobo
PIII600@800
2x128Mb HSDRAM
G400Max 10% o/c
Via 403 AGP driver
PD version 6 (new beta)
This system runs very well!
Quake 3 timedemo @ highest detail 1024x768
averages 33 fps

**Maggi** · 18 June 2000, 15:37

3DMark Result: 4245 3D marks
CPU Speed: 264 CPU 3D marks
Game 1 - Helicopter - Low Detail: 87,0 FPS
Game 1 - Helicopter - Medium Detail: 56,7 FPS
Game 1 - Helicopter - High Detail: 24,1 FPS
Game 2 - Adventure - Low Detail: 94,7 FPS
Game 2 - Adventure - Medium Detail: 57,1 FPS
Game 2 - Adventure - High Detail: 34,1 FPS
Fill Rate (Single-Texturing): 452,3 MTexels/s
Fill Rate (Multi-Texturing): 447,9 MTexels/s
High Polygon Count (1 Light): 2698 KTriangles/s
High Polygon Count (4 Lights): 2503 KTriangles/s
High Polygon Count (8 Lights): 2305 KTriangles/s
8MB Texture Rendering Speed: 375,2 FPS
16MB Texture Rendering Speed: 348,4 FPS
32MB Texture Rendering Speed: 216,7 FPS
64MB Texture Rendering Speed: 115,1 FPS
Bump Mapping (Emboss, 3-pass): 151,2 FPS
Bump Mapping (Emboss, 2-pass): 210,6 FPS
Bump Mapping (Emboss, 1-pass): 375,5 FPS
Bump Mapping (Environment): 163,1 FPS

Wanny know how ?

**TTCharon** · 19 June 2000, 07:15

3DMark2000 (on Win98SE)

Default: 3582

And yes Maggi, I wanna know how!

TTCharon

------------------
Abit BE6-2, P3-600E@820(6x135), 192mb MCT 8ns CAS3, G400MAX(OC'ed 110%), SBLIVE, AHA 2940AU, WDC 4.3, WDC 6.4, IBM GXP34 20.5, Mitsumi FX48, Yamaha 4416S, Zyxel Prestige 100IH, 3Com 905C-TX On W98SE, DX 7.0a, PD 5.52

**Snake-Eyes** · 19 June 2000, 11:44

Ok, sure Maggi. Just keep us in suspense. LOL.

Something else I wanna know is how you got the Celery stable in Windows at 952. Mine's stable (for everything, including all-night UT CityIntro.Unr flybys) at 892.5 (105FSB, 1.85v), but I can't even get it into Windows at 952 (freezes at the cursor/desktop loading portion of boot up).

And if the secret of the original question is that you got the Celery over 1Ghz, I really wanna know about it. Hehe.

------------------
Ace

**Maggi** · 20 June 2000, 00:19

hehehe ... I posted it here:
http://forums.murc.ws/ubb/Forum5/HTML/008887.html

Cheers,
Maggi

**Maggi** · 20 June 2000, 00:26

ooops ... sorry, Ace !

Here we go:

I use the ABit SlotKET!!!, FSB set to default, Voltage set to 1.85
In MoBo BIOS I set VCore to 'ignore'.
I attached a 2nd fan to my standard HS/fan combo (Pabst), but not as before on top of it !
Instead I put it to the side of my HS, pointing upwards when the CPU is plugged in, generating quite a heavy airstream floating upwards towards the PS and it's exhausting fan.

Cheers,
Maggi

**Snake-Eyes** · 20 June 2000, 06:05

Thanks, Maggi.

Gonna have to go buy myself another fan and give that a try! Right now my Slotket !!! is set to 1.65 volts, but in the BE6 BIOS, I've got it set to 1.85 (at the 892.5 oc I'm using). I'll see about changing where I set the voltage and whether that affects the oc'ability too.

Thanks again!

------------------
Ace

**superfly** · 21 June 2000, 19:04

too bad 3dmark doesn't run on win2000 and isn't multithreaded,otherwise my dual 667 p3's,would probably set a new speed record for 3dmark using a G400max(evil laugh....MUHAHAHAHAHAHAHA... ).

Announcement

Again, whats your 3DMark 2000 results?

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment