3DMark 2000 has been released...

[Scytale]

Bam! Now those are numbers. Agent, could you please post the detail results too?

[Agent31]

oh man, do I have to run all those tests again? The thing that shits me off is how you've got to write the damned things out if you don't own the full version... otherwise I wouldn't hesistate.

Maybe tomorrow

[anid]

...and why did it go down in PIII mode? Shouldn't it have gone up?

Himself, I tried it with the D3D T&L op, and my scores went down to 1205 3DMarks and 71 CPUMarks from 1323 and 101. Interesting that it went up with yours. Wonder what is going on with it? Remember too, that I am running a G200 SD, not a G400, so my scores are gonna be lower than some. Still, I'm doing about the same with my K6-3 and G200 as folks with a K6-2 and G400, so I can live with it.

------------------
I say "Here's a monkey wrench... If you bop me over the head with it long enough I might wake up for a second."

[Scytale]

Hee hee... you can save the results online, then save the web page showing the results. Or copy and paste... whatever you like.

[Agent31]

hehehe, I just noticed that... OK, I'll post them tomorrow, no problems

[Jorden]

Agent, you can save the results as a TXT file as well... Just Close the results window, then goto File, Save As, and press the box saying 3pd... it gives you the chance to save as text file as well

Jorden.

[Genom]

About my single texturing fill rate, yes I am running 5.30 drivers. There is no way in hell ahm upgrading if System Shock 2 is gonna break (like it has in 5.41 AGAIN) cause I play this game online multi most of the time and I aint gonna put up with broken drivers to make a benchmark I will prolly never run again work properly



------------------
------------------------
More hardware than any sane person should have.
-------------------------

[DuRaNgO]

well, here it is, I had to run at 600mhz instead of 620 as it continued to crash back to desktop, strange, doesn't do that in Prime95 or any other stressing programs:3D Accelerator
Matrox Millennium G400 DualHead - English
Chipset
Unknown
Resolution
1024*768
Z-Buffer Depth
16-bit
Frame Buffer
Triple
Refresh Rate
V Sync.Off
CPU Optimization
Intel(R) Pentium(R) III

Your test results

Your 3DMark2000 Score was 2806 3D Marks.

From the table below you can see detailed results of all tests.

Test
Results

3DMark Result
2806 3D marks

CPU Speed
166 CPU 3D marks

Game 1 - Helicopter - Low Detail
56.2 FPS

Game 1 - Helicopter - Medium Detail
34.6 FPS

Game 1 - Helicopter - High Detail
11.3 FPS

Game 2 - Adventure - Low Detail
64.5 FPS

Game 2 - Adventure - Medium Detail
41.9 FPS

Game 2 - Adventure - High Detail
25.3 FPS

Fill Rate (Single-Texturing)
290.3 MTexels/s

Fill Rate (Multi-Texturing)
288.9 MTexels/s

High Polygon Count (1 Light)
2253 KTriangles/s

High Polygon Count (4 Lights)
2046 KTriangles/s

High Polygon Count (8 Lights)
1827 KTriangles/s

8MB Texture Rendering Speed
243.3 FPS

16MB Texture Rendering Speed
235.7 FPS

32MB Texture Rendering Speed
164.6 FPS

64MB Texture Rendering Speed
88.0 FPS

Bump Mapping (Emboss, 3-pass)
111.1 FPS

Bump Mapping (Emboss, 2-pass)
141.9 FPS

Bump Mapping (Emboss, 1-pass)
247.8 FPS

Bump Mapping (Environment)
99.6 FPS





------------------
PIII-500mhz @ 620 ! with an Abit BE6 mobo
128mb pc-100
Mill G400 (YAHOO!!!) 32mb @ 167/208 with MGATweak-417mhz, (2.5, 2, 2.5), PD 5.41 & bios 1.5-22
Maxtor 14.3 gb Uata66 hdd
SB Live!
Winblows 98se & DX7
32 lbs. of fans, heatsinks and aluminum ductwork
3DMark Result 5954.69 3DMarks
Synthetic CPU 3D Speed 9325.69 CPU 3DMarks
Rasterizer Score 2791.72 3DRasterMarks
Game 1 - Race 65.07 FPS
Game 2 - First Person 54.89 FPS
Fill Rate 268.79 MTexels/s

[dwood]

Here's what I got....

Celeron300A@464
128MB RAM
ASUS P2B-F
G400MAX (NO O/Clocking)
Win98
Powerdesk 5.30.007

1024x768, 16-bit col, 16-bit text, 16-bit Z, triple frame ----> 1684

640x480, 32-bit col, 32-bit text, 32-bit Z, triple frame ----> 1607

1024x768, 32-bit col, 32-bit text, 32-bit Z, triple frame ----> 1562

[Borg]

hmmmmmmmm !

1024 x 768 x32 all 32 settings =2048
1024 x 768 x16 all 16 settings =2304

is that good or bed ?



------------------
PIII450@465,P2b,128mb,Matrox Mill-G400 32SH,SB.Live !(value)...

[Himself]

Heh, people PD 5.30 scores don't count.

Anid,

Yeah, that's odd.

[xortam]

Borg, your numbers sound about right. I've got 2250 in 16-bit and 19xx (don't recall exactly) in 32-bit w/ an non-overclocked PIII/450. I had ran a quick test and didn't do a disk defrag or other optimizations. I noticed that most systems show about a 300 point difference between the 16 and 32-bit numbers.

------------------

• ASUS P2B-S, PIII 450MHz, Award ACPI BIOS v1010, 128 MB RAM
• MYLEX FlashPoint RAID+ (BIOS v2.02N) running RAID 0 on two 9 GB IBM DDRS 39130D Disks
• Diamond MX300 sound card, now with MX25 S/PDIF output
• Matrox Millennium G400 Max Dual Head - English
• NEC 5FG monitor
• YAMAHA CRW4416S and NEC Multispin 3x CDs
• 3Com Fast EtherLink XL 10/100Mb TX NIC
• US Robotics 56K Voice FaxModem Pro
• Pioneer DVD-303S SCSI
• Note--All SCSI devices (except disk drives on RAID) are connected to onboard AIC7890 U2W SCSI
• Mainly running Win98 v4.10.1998

[This message has been edited by xortam (edited 09 December 1999).]

[Borg]

OK ! Thanks xortam !.... & now what ?...shall we wait till TL-800 or how ever Matrox will call hes new babe...I hope that it will hit abowe 4000 in 32 bit mode with PIII450..mmmmm yesss that would be realy nice...& with the price under 250$ with 32 mb on board .. ... am I asking too much ?


------------------
PIII450@465,P2b,128mb,Matrox Mill-G400 32SH,SB.Live !(value)...

[DuRaNgO]

64mb on board
jim

[mathew]

Nah you what only 64 I say 128 minimum :P